Aristotle University Of Thessaloniki (AUTH)
Μελέτη και έλεγχος των φυσικοχημικών και ρεολογικών ιδιοτήτων προϊόντων χυμοποίησης και αξιοποίηση των παραπροϊόντων ως βιοδιασπώμενα υλικά
Abstract
dc:descriptionThe increasing generation of agro-industrial waste and the environmental impacts associated with single-use plastics have created a pressing need for innovative valorization strategies for by-products of the food industry within the framework of the circular economy and compliance with Environmental, Social and Governance (ESG) criteria. The objective of the present doctoral dissertation was to investigate both products and by-products of the fruit juice processing industry, aiming to enhance the understanding of the physicochemical and rheological properties of juice products, while simultaneously exploring the utilization of processing residues for the development of biodegradable materials and value-added products. The first part of the study focused on the physicochemical and rheological characterization of peach puree. The influence of soluble solids concentration and temperature on rheological behavior was investigated, while sedimentation rate, particle size distribution, and zeta potential were determined considering the fruit puree matrix as a colloidal dispersion. The results demonstrated that peach puree exhibited pseudoplastic behavior, which was satisfactorily described by the Power law model. Increasing soluble solids concentration resulted in higher apparent viscosity and flow consistency coefficient values, whereas increasing temperature produced the opposite effect. Furthermore, low zeta potential values promoted sedimentation phenomena, with samples containing the lowest sucrose concentration exhibiting the highest phase separation index. The second part of the dissertation involved the development of biodegradable lignocellulosic composites from peach and apple processing by-products using hot compression molding without the addition of synthetic binders or polymeric matrices. A Definitive Screening Design (DSD) was employed to investigate the effects of recipe composition, particle size, molding pressure, temperature, and holding time on the physical and mechanical properties of the produced materials. Physicochemical and thermal analyses of the dried by-products indicated that processing temperatures below 150 °C prevented the degradation of lignocellulosic constituents. The results showed that increasing both molding pressure and holding time reduced composite thickness while simultaneously improving stiffness and flexural strength, with modulus of elasticity values exceeding 1000 MPa under optimal processing conditions. Higher molding temperatures reduced water absorption and moisture diffusivity, particularly in lignin-rich composites, by promoting lignin softening and improved particle consolidation. As a result, denser structures with limited moisture transport were obtained. Biodegradability was evaluated through soil burial tests over a period of 200 days, revealing weight losses ranging from 54.2% w/w to 90.7% w/w among the different formulations. Apple-based composites exhibited a greater degree of degradation compared to composites containing peach residues. These findings confirmed the potential of fruit juice processing by-products as sustainable alternatives to conventional single-use plastics. Furthermore, the feasibility of utilizing fruit juice processing by-products as feedstock for the three-dimensional (3D) printing of biodegradable food-service items was investigated. The developed formulations demonstrated satisfactory printing performance and deposition accuracy. Nevertheless, dehydration induced deformation and increased brittleness of the printed specimens, limiting the practical applicability and further development of the proposed approach.In parallel, biodegradable straws were developed from fruit juice processing residues using natural binding agents, aiming to improve their functional and mechanical characteristics and to adapt them to the requirements of single-use foodservice applications. Production was carried out on twin-screw extruders from two different manufacturers, and two different biopolymers were tested. The key criteria for optimizing the formulation and the extrusion conditions were the behavior of the melt during extrusion, the structure of the extrudates and their resistance to water. The straw produced from a blend of a commercial biodegradable polymer and dried juicing waste exhibited high durability upon contact with both cold and hot water, retaining its structural integrity.Finally, a preliminary techno-economic assessment was conducted for the industrial-scale production of biodegradable drinking straws. The analysis included process flow diagram development, equipment sizing, estimation of raw material and energy requirements, and evaluation of capital and operating costs. The analysis was performed for four different case studies, two for each biopolymer. The results demonstrated the positive economic potential of all the investigated case studies at selling prices equal to or higher than the break-even price, yielding a positive net present value (NPV) at the end of the 20-year operating period and an internal rate of return (IRR) exceeding the minimum acceptable rate of return (MARR) of 15%. A sensitivity analysis of the selling price further highlighted the importance of annual production capacity and operating costs in determining the economic viability of the proposed process. However, the most economically attractive cases did not ensure complete water resistance of the final product, highlighting the need to consider both economic viability and technical characteristics when selecting the optimal production approach. Overall, this dissertation contributes both to the understanding of the mechanisms governing the stability and rheological behavior of fruit juice products and to the development of sustainable biomaterials from agro-industrial residues. Furthermore, it provides a framework for industrial implementation that supports the transition toward circular bioeconomy models and reduces dependence on conventional plastic materials.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2026
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Kyroglou, Smaro
- Κύρογλου, Σμαρώ
Subjects
dc:subject × 17- Ρεολογικές ιδιότητες
- Καθίζηση
- Αξιοποίηση παραπροϊόντων χυμοποίησης
- Βιοδιασπώμενα υλικά
- Rheological properties
- Sedimentation
- Fruit waste valorization
- Biodegradable composites
- Επιστήμη Χημικού Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Χημική μηχανική
- Μηχανική Υλικών
- Επιστήμη υλικών, χαρακτηρισμός και δοκιμές
- Chemical Engineering
- Engineering and Technology
- Materials Engineering
- Materials Science, Characterization and testing
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/62936