Democritus University of Thrace (DUTH)
Σύνθεση, χαρακτηρισμός και εφαρμογή καινοτόμων ροφητικών παραγώγων χιτοζάνης για την απομάκρυνση τρισθενούς αρσενικού, εξασθενούς χρωμίου και φθοριόντων από πόσιμο νερό και υγρά απόβλητα
Abstract
dc:descriptionContamination of water resources by Cr(VI), As(III) and F⁻ is among the most persistent environmental problems, as these pollutants are non-biodegradable, highly soluble and prone to accumulation along the food chain. The present thesis investigates adsorption as an efficient, low-cost and technologically flexible solution, through the development of a comprehensive series of chitosan-based adsorbents. The materials were prepared in three forms that are directly transferable to industrial scale — powder, beads and three-dimensionally printed structures coated with chitosan — and were modified both with carbon compounds (graphene oxide and its heteroatom-enriched derivatives, activated carbon derived from agri-food waste, carbon dots, curcumin, DETA) and with metal oxides (MgO, La2O3 and the bimetallic La–Mg system). Material characterisation was combined with systematic batch experiments in simulated aqueous environments, in single, binary and ternary systems, using both deionised water and tap water, so as to capture the effect of co-existing ions under realistic conditions. The influence of pH, contact time, initial concentration and temperature was examined, while the experimental data were analysed using kinetic models (PFO, PSO, Elovich, intraparticle diffusion), isotherm models (Langmuir, Freundlich, Sips, Toth, Langmuir–Freundlich, Fritz–Schluender) and thermodynamic treatment.Cr(VI) adsorption was favoured under acidic conditions (pH 3 for the COCOSAC materials and the GO-based composites, pH 5 for the Cs/COCOSAC composites and pH 7 for the CsAC and Cs/AC/GOF systems), with the maximum capacity recorded for Cs/AC/GOF in powder form (470.10 mg/g, Toth model), followed by Cs/COCOSAC@La-Mg (197.47 mg/g), Cs/COCOSAC@MgO (158.14 mg/g), Cs/COCOSAC@La2O3 (157.04 mg/g), Cs/P,N-GO (128.55 mg/g) and Cs/AC/GOF in bead form (80.17 mg/g). For As(III) the capacities were markedly lower (0.24–1.47 mg/g), owing to the neutral H3AsO3 species prevailing over the pH range examined, with Cs/P,N-GO performing best (1.47 mg/g), followed by CsACCur5% (0.88 mg/g) and Cs/AC/GOF (0.393 mg/g as powder, 0.299 mg/g as beads). For F⁻ the same material again exhibited the maximum performance (127.76 mg/g), followed by Cs/N-GO (82.70 mg/g), Cs/AC/GOF (54.11 mg/g as powder and 33.40 mg/g as beads) and Cs/P-GO (32.92 mg/g). The kinetics were rapid (30–180 min) and were described mainly by the PFO and PSO models — the fastest uptake being that of Cr(VI) on Cs/AC/GOF (k1 = 0.113 min–1 for the powder versus 0.032 min–1 for the beads) — whereas for F⁻ the Elovich model prevailed, indicating chemisorption on an energetically heterogeneous surface. Thermodynamic analysis revealed an endothermic and, in most cases, spontaneous process. The beads and the 3D structures retained high performance over 10–15 adsorption–desorption cycles using 0.01 M NaOH, with 3D-GO@NBs-Cs maintaining ~79% removal after 15 cycles. Overall, this work demonstrates that combining chitosan with heteroatom-enriched graphene oxide, with bimetallic La–Mg oxides or with mixed activated-carbon/graphene-oxide-foam structures (Cs/AC/GOF, active at neutral pH) yields high-performance, recyclable adsorbents that can be shaped into forms suitable for real water treatment units.
Degree
thesis:*- Grantor dc:publisher
- Democritus University of Thrace (DUTH)
- Year dc:date
- 2026
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Maroulas, Konstantinos
- Μαρούλας, Κωνσταντίνος
Subjects
dc:subject × 16Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/63124