Back to search

Georgia Southern University

Blade Design and Analysis of Horizontal-Axis Wind Turbine: CFD and Experimental Investigation of Blades Design

Abstract

dc:description.abstract

The present thesis focuses on the investigations of the computational fluid dynamics analysis and the experimental study of small scales Horizontal Axis Wind Turbine (HAWT) blades. The initial steps are taken; in the process of this research were the selection of the airfoil type to be used in each blade design and the creation of a blade design with high efficiency operating in a low wind speed zone. For the mentioned blade design process, the following airfoils were selected respectively NACA 0010, NACA 0012, NACA 1412, NACA 2412, NACA 2414, NACA 4412 and NACA 6412. This selection intends to provide each blade with a greater lift force, as well as an increase in the Tip Speed Ratio (TSR). An angle of attack (AOA) 10°, 20°, and 30° are added to each blade design with reference to the longitudinal hub axis. Using the CFD software Fluent and FEA a structural analysis and computational fluid dynamic simulations were performed on one hand in order to confirm that the design is structurally sounded and on the other hand, to predict the theoretical aerodynamic performance of the blades. Eight different models of blades were designed and fabricated to conduct the experimental study, using a wind tunnel and data acquisition system to determine the performance of each blade at different wind speeds and different angles of attacks. Analyzing the results from the experimental part of the research using MATLAB indicates a significant improvement of the blade efficiency. At an optimum angle of attack between 8 degrees and 12 degrees, a minimum wind speed of 8 m/s, and an angle of twist of 17.5 degrees, the turbine generated 357 mW with a calculated improved efficiency of 24.5%.

Degree

thesis:*
Name thesis:degree_name
Master of Science, Mechanical Engineering
Level thesis:degree_level
Thesis (open access)
Discipline thesis:degree_discipline
Department of Mechanical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Zongo, Relwinde Fabrice
Contributors dc:contributor
  • Valentin Soloiu
  • Marcel Ilie

Subjects

dc:subject × 9

Rights

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.georgiasouthern.edu/etd/1944

Chain of custody

source
Harvested from
Georgia Southern University
Base URL
digitalcommons.georgiasouthern.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Zongo, Relwinde Fabrice. Blade Design and Analysis of Horizontal-Axis Wind Turbine: CFD and Experimental Investigation of Blades Design. Thesis (open access) thesis, https://digitalcommons.georgiasouthern.edu/etd/1944