Back to search

Georgia Southern University

A Study of Reduced Activation Ferritic Martensitic Metal Core Wire for Wire Arc Additive Manufacturing

Abstract

dc:description.abstract

This study seeks to determine the technical feasibility of fabricating reduced activation ferritic martensitic (RAFM) steel parts, using a wire arc additive manufacturing (WAAM) process. The WAAM process, manufactures a part by depositing layers of metal onto a substrate to build a large scale near net shape part. RAFM alloy steels are next generation steels designed to resist radiation effects in the radiation intense working environments, such as nuclear reactors. To achieve this, process development and testing to design the WAAM production process with the custom RAFM filler wire was carried out. Several welding waveform modes were tested, and it was determined that Pulse waveform mode offers an acceptable weld parameter to successfully fabricate custom made RAFM metal cored wire. After successfully fabricating the first test walls hardness testing and metallography was conducted to categorize the steels microstructure by controlling the interpass temperature. The microstructure present is typical martensitic lath, and the presence of delta ferrite is inevitable. The settings were further tested with the addition of shielding gas experimentation to determine if porosity’s visible in the initial prints could be removed. The shielding gas results did aid in the porosity control, but introduced other issues arose. With a reduction in amperage input from the initial settings and the introduction of wait times to allow the equipment to cool, large scale prints were successfully fabricated. The mechanical properties of the deposited material were tested, such as impact toughness as well as macro and microhardness. These tests resulted in an average impact absorption energy of 6.25J and an average hardness across two-layer deposition interpass test samples of 423.74HV.

Degree

thesis:*
Name thesis:degree_name
Master of Science, Mechanical Engineering
Level thesis:degree_level
Thesis (open access)
Discipline thesis:degree_discipline
Department of Mechanical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Reichenbach, Alexander L
Contributors dc:contributor
  • Haijun Gong
  • JingJing Qing
  • Mingzhi Xu

Subjects

dc:subject × 7

Rights

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.georgiasouthern.edu/etd/2437

Chain of custody

source
Harvested from
Georgia Southern University
Base URL
digitalcommons.georgiasouthern.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Reichenbach, Alexander L. A Study of Reduced Activation Ferritic Martensitic Metal Core Wire for Wire Arc Additive Manufacturing. Thesis (open access) thesis, https://digitalcommons.georgiasouthern.edu/etd/2437