Back to search

Georgia Southern University

Effects of Titanium and Cerium Addition on Grain Size and Mechanical Properties of Ductile Iron Castings

Abstract

dc:description.abstract

According to the Hall-Petch equation, the refinement of grains in metals increases the yield strength of the material. Austenite grain size influences the fineness of microstructural constituents in the ferrous alloys. It is well studied that cerium and titanium refine the austenite in steels and some gray irons, but no studies have been done to systematically explore the effects of cerium and titanium additions on austenite in ductile iron. This study sought to determine the effects of selected levels of these elements on the grain size within ductile iron. A hypoeutectic iron was chosen for testing as the proeutectic phase is austenite and effects of alloy additions on austenite can be studied directly. Cerium additions in the amounts of 0.01 wt.% and 0.03 wt.% and titanium additions in the amounts of 0.02 wt.% and 0.04 wt.% were tested. The effectiveness of each of these elements as heterogeneous nuclei formers was determined using three methods: direct secondary dendrite arm spacing measurement, liquidus undercooling and recalescence study, and tensile testing. The results of the study showed that cerium refined the austenite effectively and the refinement improved as the amount of cerium increased, although the elongation of the ductile iron was not decreased For titanium, the dendrite arms showed significant refinement in faster cooling conditions but showed coarsening in slower cooling conditions. The elongation was also slightly reduced with no appreciable gain in strength. There are also signs that these additions negatively impacted the graphite phase although the assessment of this mechanism is outside the scope of this study.

Degree

thesis:*
Name thesis:degree_name
Master of Science, Mechanical Engineering
Level thesis:degree_level
Thesis (open access)
Discipline thesis:degree_discipline
Department of Mechanical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Fowler, Shelton F, IV
Contributors dc:contributor
  • Jingjing Qing
  • Drew Snelling

Subjects

dc:subject × 8

Rights

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.georgiasouthern.edu/etd/2439

Chain of custody

source
Harvested from
Georgia Southern University
Base URL
digitalcommons.georgiasouthern.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Fowler, Shelton F, IV. Effects of Titanium and Cerium Addition on Grain Size and Mechanical Properties of Ductile Iron Castings. Thesis (open access) thesis, https://digitalcommons.georgiasouthern.edu/etd/2439