Georgia Southern University
Fabrication and Testing of Carbon Fiber Reinforced Composites via Vat-Photopolymerization Additive Manufacturing
Abstract
dc:description.abstractStereolithography (SLA) additive manufacturing is a method of manufacturing capable of generating complex geometric shapes with very high accuracy. Classic SLA uses UV curable resins, particularly polylactic acid (PLA) for part generation, but recent research has focused on utilizing this technology for the generation of composite materials. Many composite materials have been successfully manufactured using this technology, but very little research has been performed on the generation of carbon fiber-reinforced composite materials. CF-SLA is often overlooked due to carbon fiber’s natural inability to bond with PLA. To overcome this boundary, the author used surface modification techniques on chopped carbon fibers to achieve adequate bonding. Here, two modification techniques were explored: a Sodium Dodecyl Sulfate (SDS) surfactant addition and Nitric acid (HNO3) etching. These methods were used to functionalize and prepare the surface of chopped CFs for bonding with PLA resin. Treated fibers were dispersed in generic PLA resin, and tensile test specimens were printed for examining the reinforcement potential of the two treatment methods. Additional complexities arise during printing with fibers including fiber alignment, accumulation, and fiber fallout. To address these issues a novel in-process mixing method was developed to maintain fiber dispersion. A two-level three-factor factorial design was performed for both treatment methods to determine optimal parameters. Through mechanical testing, atomic force microscopy, scanning electron microscopy, and contact angle measurements the accompanying material property changes were characterized to further develop the field of fiber-reinforced vat-photopolymerization additive manufacturing.
Degree
thesis:*- Name thesis:degree_name
- Master of Science in Applied Engineering (M.S.A.E.)
- Level thesis:degree_level
- Thesis (restricted to Georgia Southern)
- Discipline thesis:degree_discipline
- Department of Manufacturing Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Palacio, Anthony G
- Contributors dc:contributor
-
- Yue Zhang
- Hossein Taheri
Subjects
dc:subject × 7Rights
- Licence dc:rights.license
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://digitalcommons.georgiasouthern.edu/etd/2446