Back to search

Georgia Southern University

An Experimental Study on the Mechanical Properties and Chemical Composition of LCD 3D Printed Specimens

Abstract

dc:description.abstract

Additive manufacturing technologies have been enhanced throughout the years yet have surprised the manufacturing industry due to their high-end surface finish and dimensional accuracy. Different experiments have been done to identify a specific phenomenon known in the vat-polymerization field. Distortion and dimensional inaccuracy tend to affect the overall properties of the process, either physical or chemical. This approach allows the understanding of how the physical properties have been affected and how to study the chemical properties to avoid this type of phenomenon. The chemical reaction between polymer and UV light has been studied and experimented with to the point that certain parameters must be altered to avoid photodegradation. Photodegradation or photooxidation is the process where 3D-printed polymer specimens become brittle, and their mechanical properties tend to fail faster than a healthy specimen. Experimentation was done by allocating 3 different levels into 4 parameters, each parameter was investigated to be a cause to either enhance or affect the overall prints by LCD/SLA printing. Oxygen Concentration, Oligomer Concentration, Stabilizer Concentration, and Exposure Time were the parameters chosen to run these experiments, each having 3 different levels to be tested with. ASTM standard specimens were used to provide parts for 3 different characterization and mechanical testing: Tensile Testing, Compression Testing, and Hardness Testing. Results showed higher mechanical properties around Oxygen Concentration, Stabilizer Concentration, and Exposure Time. Various One-way ANOVA Tests were provided to check if the results retrieved statistically significant data. It was analyzed that each parameter provided statistically significant data, calculating a p-value less than 0.05 for each analysis of variance done. This data allowed the comparison between the current experiment in hand with external research, providing aspiring results for this new approach.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Applied Engineering (M.S.A.E.)
Level thesis:degree_level
Thesis (open access)
Discipline thesis:degree_discipline
Department of Manufacturing Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Gomez, Sebastian
Contributors dc:contributor
  • Haijun Gong
  • Yue Zhang

Subjects

dc:subject × 12

Rights

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.georgiasouthern.edu/etd/2636

Chain of custody

source
Harvested from
Georgia Southern University
Base URL
digitalcommons.georgiasouthern.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Gomez, Sebastian. An Experimental Study on the Mechanical Properties and Chemical Composition of LCD 3D Printed Specimens. Thesis (open access) thesis, https://digitalcommons.georgiasouthern.edu/etd/2636