Back to search

Georgia Southern University

Investigations of Performance and Emissions of a Fischer-Tropsch GTL Sustainable Aerospace Fuel with Lubricity Improver in a Compression Ignition Engine with Butanol Port Fuel Injection

Abstract

dc:description.abstract

As there is increasing concern over emissions of traditional fossil fuels, as well as the future of continued reliance on this dwindling resource, it is becoming increasingly evident that alternative fuels are a necessity. This research investigates the use of a Fischer-Tropsch fuel from natural gas feedstocks, S8, in an internal combustion research engine with a common rail fuel injection system. This synthetic kerosene fuel has a high DCN of 62, indicating high affinity to autoignition compared to conventional pump diesel (ULSD) at 48 DCN. However, due to the process by which it is produced, this fuel lacks the necessary lubrication qualities needed to be a proper substitute for ULSD. To mitigate this, Methyl Oleate, a biodiesel compound, was blended with S8 at 3% by mass, resulting in a blend with significantly improved lubricity while still maintaining the parameters that make S8 a desirable fuel for use in an IC engine. The high DCN contributed to a short Ignition Delay (ID) for the S8 + 3% Methyl Oleate blend which was observed both in the Constant Volume Combustion Chamber (CVCC) and in the instrumented research engine. In the engine, the short ID combined with the superior vaporization rate and spray quality resulted in a smaller premixed combustion event and more mixing controlled combustion, which resulted in smoother engine operation. Low Temperature Heat Release (LTHR) analysis of this fuel further solidified these findings. In conventional engine operation, this fuel blend resulted in lower NOx and soot emissions compared with ULSD. Furthermore, use of boost pressure, Exhaust Gas Recirculation (EGR), and Port Fuel Injection (PFI) of n-butanol was investigated as additional means to reduce emissions. PFI of n-butanol (a renewable alcohol capable of production from biomass) resulted in significant reduction in soot, at the cost of increased NOx. Combination with boost pressure reduced the amount of premixed combustion and improved NOx emissions. The overall results indicate that S8 with 3% Methyl Oleate as a lubricity improver can be a potential replacement for ULSD in IC engine operation.

Degree

thesis:*
Name thesis:degree_name
Master of Science, Mechanical Engineering
Level thesis:degree_level
Thesis (open access)
Discipline thesis:degree_discipline
Department of Mechanical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Willis, James B
Contributors dc:contributor
  • Marcel Ilie
  • Mosfequr Rahman

Subjects

dc:subject × 10

Rights

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.georgiasouthern.edu/etd/2808

Chain of custody

source
Harvested from
Georgia Southern University
Base URL
digitalcommons.georgiasouthern.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Willis, James B. Investigations of Performance and Emissions of a Fischer-Tropsch GTL Sustainable Aerospace Fuel with Lubricity Improver in a Compression Ignition Engine with Butanol Port Fuel Injection. Thesis (open access) thesis, https://digitalcommons.georgiasouthern.edu/etd/2808