Back to search

Georgia Southern University

Investigation of Mechanically Fatigue Low-Frequency Energy Harvesting Effects on Isotropic Materials

Abstract

dc:description.abstract

This research project reports an exploratory investigation of energy harvesting effect on isotropic material that goes through low frequency mechanical fatigue. Energy harvesting is a growing field of study that can recycle ambient energy back into a system that would otherwise be lost. This is a significantly useful method for the ongoing energy crisis and provides an alternate route to design and upgrade systems to be more efficient and last longer than current system designs. However, it is time to investigate if there is any effect vibration-based energy harvesting has on the structure from which energy is being harvested. To answer this novel research question, both numerical and experimental studies are designed to determine the ultimate tensile strength and fatigue life of Aluminum structures with and without employing energy harvesting technique. Numerical studies are performed by commercial finite element solver and the experimental studies are performed by well controlled material testing systems. Two sets of specimens are prepared following ASTM standards. While the first set is reserved for baseline tests to determine ultimate tensile strengths and fatigue life without energy harvesting, the second set is used for inducing fatigue test with varying fatigue loads (3 Hz and 5 Hz). Energy is harvested from the second set of specimens. To quantify the material property degradations, linear ultrasonic wave velocity and non-linear normalized second harmonic frequencies are determined. Finally, the remaining strengths of the fatigued specimens are determined, and a correlation is drawn if energy harvesting has any effects on these mechanically fatigued specimens. A good match is found between the experimental and simulation results. The results show an average decrease in ultimate strength of 8% at 5Hz frequency and 13% at 3Hz frequency.

Degree

thesis:*
Name thesis:degree_name
Master of Science, Mechanical Engineering
Level thesis:degree_level
Thesis (open access)
Discipline thesis:degree_discipline
Department of Mechanical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Meade, Daniel J
Contributors dc:contributor
  • Mohammad Ahad
  • Mosfequr Rahman

Subjects

dc:subject × 9

Rights

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.georgiasouthern.edu/etd/2809

Chain of custody

source
Harvested from
Georgia Southern University
Base URL
digitalcommons.georgiasouthern.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Meade, Daniel J. Investigation of Mechanically Fatigue Low-Frequency Energy Harvesting Effects on Isotropic Materials. Thesis (open access) thesis, https://digitalcommons.georgiasouthern.edu/etd/2809