Back to search

Georgia Southern University

Experimentatal and Numerical Investigation of Turbojet Engine Performance, Emissions, and Noise/Vibrations Using Jet-A and F24 Fuel

Abstract

dc:description.abstract

Drastic improvement in cost effectiveness of high-power computing resources has generated a great interest numerical simulation to reduce the overhead cost of engine manufacturing, maintenance, and environmental concerns of engine testing. To accomplish this goal, this research presents the differences between military F24 fuel and commercial aviation fuel Jet-A from a thermochemical and engine performance perspective. This experimental data was used to create and validate a numerical model of the engine used in the experiments fueled with both Jet-A and F24 fuels. The experimental data was collected using a research based single stage turbojet engine outfitted with many sensors for collecting engine characteristic data. Emissions data was collected for high priority species and noise/vibration data was gathered. This information was used to develop a scale numerical model of the engine. This simulation was a transient model using the EDM combustion model and k-ɛ turbulence model for engine speed of 60,000RPM, 65,000RPM, and 70,000RPM. The results show that F24 proves to be a more economical, better performing environmentally friendly fuel. F24 has lower internal engine temperatures by approximately 4.92% across all data collection points. F24 produced a minimum of 8% greater thrust with a 5.3% decrease in fuel flow as compared to Jet-A. F24 drastically reduced emissions in all species analyzed with a maximum reduction of 160% in THC. This greatly improved the thrust specific emission of F24. F24 also had greater SPL and acceleration at all engine speeds. The numerical model followed experimental trends very closely but resulted in some outlier percentage errors at very specific points to be as great as 31%. Furthermore, numerical analysis showcased the swirl effect produced by guide vanes and rotors. The increase in engine speed enhanced the swirl number of the air and resulted in more efficient combustion, as identified through the temperature, velocity, and fuel mass fraction contours. TKE contours identified areas of the engine that were susceptible to high energy eddies and therefore areas of flow path improvement in the turbine and exhaust stages.

Degree

thesis:*
Name thesis:degree_name
Master of Science, Mechanical Engineering
Level thesis:degree_level
Thesis (open access)
Discipline thesis:degree_discipline
Department of Mechanical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • McAfee, John W, Jr
Contributors dc:contributor
  • Valentin Soloiu
  • Mosfequr Rahman

Subjects

dc:subject × 11

Rights

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.georgiasouthern.edu/etd/2830

Chain of custody

source
Harvested from
Georgia Southern University
Base URL
digitalcommons.georgiasouthern.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

McAfee, John W, Jr. Experimentatal and Numerical Investigation of Turbojet Engine Performance, Emissions, and Noise/Vibrations Using Jet-A and F24 Fuel. Thesis (open access) thesis, https://digitalcommons.georgiasouthern.edu/etd/2830