Back to search

Georgia Southern University

Effect of Alloying Additions on Austenite Refinement in Nickel-Alloyed Ductile Cast Irons

Abstract

dc:description.abstract

The benefits associated with the application of ductile irons are significantly attributed to the control of microstructures, with refinement of austenitic matrix during solidification playing a significant role. Nickel alloyed ductile irons are attractive due to their potential for high ductility and suitability for potential high-temperature applications with stable austenitic microstructure. Refinement of austenite grain structure is thus important to enhance the mechanical properties of the alloyed ductile iron. This research investigates the impact of in-mold additions of different alloying elements on the austenite morphology and grain refinement of nickel-alloyed ductile iron along with the associated mechanical properties. A hypoeutectic alloy with primary austenite phase was designed using thermodynamic calculations. Castings with different alloying additions were poured and were subject to different tests and analysis, assessing their solidification behavior, macrostructure, microstructure, and tensile properties. Macrostructure analysis of austenite revealed finer grain size with in-mold additions of Al, Ti, Ca, Bi, mischmetal, and Fe powder. Among these, Ti significantly increased the equiaxed grain proportions, making it the most effective and potent austenite refiner and the one that improved the mechanical properties the most. Inclusion analysis with scanning electron microscope equipped with energy dispersive x-ray and automated feature analysis revealed the impact of nitride inclusions to be more significant on the austenite refinement and strength enhancement in comparison to the other inclusions. On the contrary, Ca addition proved to be the least effective in terms of mechanical properties while both Al and Ca did not have significant impact to increase the size of the equiaxed zones even though some reduction in columnar grain size could be attained.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Applied Engineering (M.S.A.E.)
Level thesis:degree_level
Thesis (open access)
Discipline thesis:degree_discipline
Department of Manufacturing Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Aahamed, Adnan Adib
Contributors dc:contributor
  • Mingzhi Xu
  • Haijun Gong

Subjects

dc:subject × 8

Rights

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.georgiasouthern.edu/etd/3061

Chain of custody

source
Harvested from
Georgia Southern University
Base URL
digitalcommons.georgiasouthern.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Aahamed, Adnan Adib. Effect of Alloying Additions on Austenite Refinement in Nickel-Alloyed Ductile Cast Irons. Thesis (open access) thesis, https://digitalcommons.georgiasouthern.edu/etd/3061