Back to search

University of Kent,

Experimental and Modelling Study of Ionic Conductivity in Lithium Phosphate and Silicate Glasses

Abstract

dc:description.abstract

This study is an attempt to investigate ionic conductivity and structural components of lithium containing glasses for their use as possible electrolytes in solid state Li-ion batteries. 33.3Li 2 O-66.7SiO 2 , Li 2 O-P 2 O 5 (multiple compositions) and Li 3 Fe 2 (PO 4 ) 3 glasses were synthesised using conventional melt quenching and were characterised using various techniques including XRD, DSC, TGA, pycnometry and 31 P MAS-NMR. It was found a small (5mol%) addition of Nb 2 O 5 to the Li 3 Fe 2 (PO 4 ) 3 glass was necessary for the formation of a glass 37.5Li 2 O-20Fe 2 O 3 -5Nb 2 O 5 -37.5P 2 O 5 . The glasses conductivity was then measured using impedance spectroscopy over a frequency range of 200kHz – 100Hz and a temperature range of 300K – 525K. It was observed that an increasing temperature corresponded to an increasing conductivity, as E expected from the Arrhenious equation: ? = ? 0 exp (? k a T ). Conductivity values were B compared to published values and the first reported conductivity values for 37.5Li 2 O- 20Fe 2 O 3 -5Nb 2 O 5 -37.5P 2 O 5 glass were obtained. Activation energies were also calculated and compared to published data. MD models of lithium disilicate, lithium metaphosphate and 37.5Li 2 O-20Fe 2 O 3 -5Nb 2 O 5 - 37.5P 2 O 5 were made. These models were then analysed and compared to experimental diffraction results. It was found that the lithium disilicate and the lithium metaphosphate model structures compare well to experimental data (X-ray and Neutron diffraction). Conductivity was estimated from mean squared displacement. All models gave an overestimation of conductivity compared to experimental data, due to limitations of the simulation method. However, MD did predict that lithium disilicate and lithium metaphosphate glasses have a similar conductivity as observed experimentally. It was found that whilst the addition of Fe (and Nb) to the lithium phosphate glass improved chemical durability, its conductivity was reduced. In addition to this the conductivity for the 37.5Li 2 O-20Fe 2 O 3 -5Nb 2 O 5 -37.5P 2 O 5 glass was found to be significantly lower than its crystalline counterpart which will be a disadvantage for its use as a solid electrolyte.

Degree

thesis:*
Level dc:type.qualificationlevel
mscres
Grantor dc:publisher.institution
University of Kent,
Year dc:date.issued
2014

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Hogan, Matteo P
Advisor dc:contributor.advisor
  • Mountjoy, Gavin

Subjects

dc:subject × 1

Rights

Language dc:language
en

Chain of custody

source
Harvested from
University of Kent
Base URL
kar.kent.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Hogan, Matteo P. Experimental and Modelling Study of Ionic Conductivity in Lithium Phosphate and Silicate Glasses. mscres thesis, University of Kent,, 2014.