Back to search

University of Kent

Frequency stabilised laser diodes and their use in length metrology

Abstract

dc:description.abstract

This thesis is concerned with the use of indexed-guided GaA1As laser diodes in length metrology. Since these lasers have important differences from more commonly use HeNe lasers in interferometry, the thesis begins with a review and investigation of these differences. A key problem is the relatively large linewidth (typically 30 MHz). This is reduced, by using the optical feedback from a resonant confocal etalon, to less than -10kHz. Potential spectroscopic frequency references are discussed and the choice made of the rubidium (Rb) D lines at 780nm and 795 nm, using either Doppler-free features or the linear absorptions. The optically narrowed laser is then stabilised to the various hyperfine components. By measuring the reproducibility of the difference frequency between two systems, a relative frequency reproducibility of \(\approx\) 1x10-10 is demonstrated. Laser frequency stabilities are measured for a number of different cases, for example with the lasers free-running and offset locked. for two optically narrowed RB-stabilised laesrs at \(\tau\)=10 s, the relative frequency stability is \(\approx\) fx10-12. The hyperfine intervals of the two Rb lines are also measured for both isotopes (85Rb and 87Rb), representing the most complete study of Rb-stabilised diode lasers to date. From these results, values for the hyperfine constants and isotope shifts are obtained. Finally, the absolute frequencies of both RB-stabilised laser diodes are measured by interferometric comparison with an iodine stabilised HeNe laser at 633 nm with a relative accuracy of \(\pm\) 1x10-9. To demonstrate the use of a frequency tunable laser diode in distance measurement, a swept wavelength measurement system was developed with a demonstrated accuracy of a few parts per million. The thesis ends with a discussion of longitudinal mode control in laser diodes and some potential future uses in length and optical frequency metrology.

Degree

thesis:*
Name dc:type.qualificationname
phd
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Kent
Year dc:date.issued
1992

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Barwood, Geoffrey P.

Subjects

dc:subject × 1

Rights

Language dc:language
en

Chain of custody

source
Harvested from
University of Kent
Base URL
kar.kent.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Barwood, Geoffrey P.. Frequency stabilised laser diodes and their use in length metrology. doctoral thesis, University of Kent, 1992.