Back to search

University of Kent,

Additive Manufacturing of Smart Antennas and Frequency Selective Surfaces

Abstract

dc:description.abstract

This thesis presents the development and the additive manufacturing of smart antennas and frequency selective surfaces (FSS) for microwave, millimetre wave, and low-Terahertz applications. Numerous fabrications techniques such as etching, low-cost inkjet-printing, Fused Filament Fabrication (FFF) and Aerosol Jet Printing are employed to fabricate the antennas and FSS. Firstly, frequency reconfigurable antennas with close-coupled biasing technique are developed using double-sided etching on a thin mylar substrate for smart current and voltage sensing applications. The frequency tunable antenna also acts as a novel current sensing antenna in a smart sensing system that can sense the alternating current passing through a wire. The design is followed by introducing a low-cost inkjet-printed industry ready solution for frequency reconfigurable antennas where a single antenna aperture solution is utilised to demonstrate frequency reconfigurability in both switching and tuning configurations. Development of Frequency Selective Surfaces using low-cost printing machine is demonstrated in which FSS structures are inkjet-printed as wallpaper posters for Radio Frequency (RF) shielding and signal enhancements for 4G and 5G applications. A novel approach for fully 3D printing an FSS structure is also demonstrated using a low-cost open-source printer, which was modified to print the filament and the conductive inks simultaneously. Widespread investigation of industry-grade Aerosol Jet printing is utilised for additive manufacturing of bandstop and bandpass FSS designs for RF shielding and signal filtering. The bandstop designs are developed for microwave and millimetre-wave applications. The bandpass slot FSS designs are developed for millimetre wave and low-Terahertz applications for futuristic Beyond 5G and 6G systems.

Degree

thesis:*
Name dc:type.qualificationname
phd
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Kent,
Year dc:date.issued
2021

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Shastri, Anshuman
Advisor dc:contributor.advisor
  • Sanz-Izquierdo, Benito

Rights

Language dc:language
en

Chain of custody

source
Harvested from
University of Kent
Base URL
kar.kent.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Shastri, Anshuman. Additive Manufacturing of Smart Antennas and Frequency Selective Surfaces. doctoral thesis, University of Kent,, 2021.