Back to search

McMaster University

Adjuster Rod Design in a CANDU Reactor and Flux Distributions Due to an Arbitrary Source of Neutrons

Abstract

dc:description.abstract

This report consists of two separate studies. The first part deals with the calculation of the tube thickness of the Bruce B adjuster rods. The incremental cross-section for four tube thicknesses were obtained using the SUPERCELL Method. The tube thicknesses were then calculated so that the flux distributions at steady state full power and the corresponding total reactivity worth of the adjuster rods were in agreement with the reference design valves. The second part deals with the modifications made to the three-dimensionalSORGHUM code to permit calculations of steady-state flux distributions in asubcritical assembly in the presence of a constant non-fission meutron source.

Degree

thesis:*
Department dc:contributor.department
Engineering Physics
Year dc:date.issued
1978

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Bertachas, Yiannis
Advisors dc:contributor.advisor
  • Trojan, O.A.
  • Akhtar, P.

Subjects

dc:subject × 5

Rights

Language dc:language.iso
en

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
McMaster University
Base URL
macsphere.mcmaster.ca/server/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Bertachas, Yiannis. Adjuster Rod Design in a CANDU Reactor and Flux Distributions Due to an Arbitrary Source of Neutrons. 1978. http://hdl.handle.net/11375/15387