McMaster University
Round Hollow Structural Sections Subjected to Inelastic Strain Reversals
Abstract
dc:description.abstract<p> A research programme is presented to more fully understand the behaviour of Round Hollow Structural Sections subjected to inelastic strain reversals. An attempt is made to establish a preliminary guideline for choosing a reasonable value for the slenderness ratio (D/t) that qualifies the Round HSS for cyclic loading. </p> <p> An experimental programme on nine sections was performed to evaluate the loss in load capacity due to inelastic cyclic loading and to construct the load-deflection hysteresis loops. </p> <p> Three different limiting cyclic deflections were imposed to the smallest D/t section and a comparison was made between the performance of the tube in each case. </p> <p> Prasad's computer program was used to select the strain value at which local buckling will appear and to calculate the half buckle wave-length. The results were compared to the experimental results obtained by the author. </p> <p> A comparison is made between two Round HSS having different diameters and thicknesses but the same D/t ratio. </p> <p> A comparison is made between the behaviour of Round HSS and Square HSS subjected to the same cyclic loading programme. </p> <p> An attempt is made to suggest a reasonable curve relating the number of cycles to failure and the D/t ratio. </p>
Degree
thesis:*- Department dc:contributor.department
- Civil Engineering
- Year dc:date.issued
- 1976
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Chidiac, Magdi Antoine
- Advisor dc:contributor.advisor
-
- Korol, Robert M.
Subjects
dc:subject × 4Rights
- Language dc:language.iso
- en
Identifiers
dc:identifier.*- Identifier URI
- https://doi.org/10.71548/19557