Back to search

McMaster University

Boiling Heat Transfer to Turbulent Liquid Films

Abstract

dc:description.abstract

<p> Benzene and water films were passed over an inclined, hot copper plate. The boiling heat transfer to the turbulent liquid films has been measured with local heat-flux meters. These meters have been adopted from a design suggested by Gardon (G10), and could be used to measure boiling heat fluxes with an accuracy of about -20,000 BTU/hr.sq.ft. The results indicate that the heat transfer to the liquid films compares well with that of forced convection subcooled boiling. </p> <p> During boiling the liquid film is destroyed by the growing vapour bubbles and by the separation of the liquid from the hot plate. The break-up of the liquid films has been investigated with high-speed photography but an analysis of the hydrodynamics of this break-up has not been made. </p>

Degree

thesis:*
Department dc:contributor.department
Chemical Engineering
Year dc:date.issued
1966

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Dernedde, Edgar
Advisor dc:contributor.advisor
  • Hoffman, T. W.

Subjects

dc:subject × 7

Rights

Language dc:language.iso
en

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
McMaster University
Base URL
macsphere.mcmaster.ca/server/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Dernedde, Edgar. Boiling Heat Transfer to Turbulent Liquid Films. 1966. http://hdl.handle.net/11375/17648