Back to search

McMaster University

Measurement of the Loss in Optical Fibres

Abstract

dc:description.abstract

<p> The equipment necessary to measure the loss in an optical fibre has been constructed. The details of the design and the results of testing the equipment are given. This equipment was designed to measure the loss induced in fibres by ionizing radiation, but can also be used to measure undamaged samples. A "dual-beam" system is used to increase the accuracy of the equipment.</p> <p> The equipment will measure the spectral attenuation of an optical fibre to an accuracy of ±1 dB/km between .9 and 1.65 μm if the fibre is at least 175m long and has an attenuation of less than 115 dB/km. Simple modifications to the equipment would reduce the sample length required for ±1 dB/km accuracy to 60 m.</p> <p> The minimum sample length is determined by the accuracy with which samples can be connected into the system. The maximum sample attenuation is determined by the signal to noise ratio. Methods of increasing the signal to noise ratio and the sample connection accuracy are discussed. Calculations based on the suggested improvements show that the sample length can be reduced to 45 m and the maximum attenuation increased to 750 dB/km for ±1 dB/km accuracy. The use of a testing method which does not require removal of the sample could give ±1 dB/km accuracy for 10 m samples.</p> <p> The operating and adjustment procedures for the equipment are given in the appendices to this report.</p>

Degree

thesis:*
Department dc:contributor.department
Engineering Physics
Year dc:date.issued
1980

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Sinclair, William John
Advisor dc:contributor.advisor
  • Garside, B. K.

Subjects

dc:subject × 1

Rights

Language dc:language.iso
en_US

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
McMaster University
Base URL
macsphere.mcmaster.ca/server/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Sinclair, William John. Measurement of the Loss in Optical Fibres. 1980. http://hdl.handle.net/11375/20170