Back to search

McMaster University

Design and Optimization of Membrane Filtration and Activated Carbon Processes for Industrial Wastewater Treatment Based on Advanced and Comprehensive Analytical Characterisation Methodologies

Abstract

dc:description.abstract

Aevitas is an industrial wastewater treatment plant that receives about 300 m3/day of mixture of wastewater from different industries. The chemical oxygen demand of higher 600 ppm and the variety of the chemical constitution of industrial wastewater are two significant problems on Aevitas. Therefore, there is a strong need for developing advanced analytical techniques that can identify the specific compounds that are the source of COD. During 10 months, about 75 industrial samples were characterized using a battery of tests including GC/MS, COD, TOC, and pH to identify the chemicals that are main source of COD in the industrial wastewaters. Results showed that the COD of 87% of 75 provided samples from Aevitas plant was higher than 600. At the first step of process design, activated carbon was used to eliminate the identified organic chemicals from the wastewaters. The maximum and minimum of COD removal (depends on the chemical composition) of the wastewaters were obtained as 94 and 24%, respectively. Moreover, the amount of COD and TOC that can be adsorbed on the surface of 1 gram of the activated carbon were 25 and 7 mg, respectively. Although activated carbon is capable to reduce the COD, its capacity of adsorption is limited. To overcome this problem an alternative process, membrane filtration was applied for COD removal. Two types of crossflow NF (NF270, NF90, NFX, NFW, NFS, TS80, XN45, and SXN2_L) and RO (BW60 and TW30) membranes in two modules of the spiral wound and flat sheet were used. The filtration results of 11 different industrial wastewaters showed that NF90, TS80, NFX, and NFS were effective in COD removal. However, in terms of output flux NFX and NFS flat sheet were better than others were. Similar to the activated carbon process, the COD removal in filtration process was between 30 and 90%. The obtained results can be used to scale up the membrane filtration process at Aevitas.

Degree

thesis:*
Department dc:contributor.department
Chemical Engineering
Year dc:date.issued
2019

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Alizadeh Kordkandi, Salman
Advisor dc:contributor.advisor
  • Latulippe, David

Subjects

dc:subject × 6

Rights

Language dc:language.iso
en

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
McMaster University
Base URL
macsphere.mcmaster.ca/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Alizadeh Kordkandi, Salman. Design and Optimization of Membrane Filtration and Activated Carbon Processes for Industrial Wastewater Treatment Based on Advanced and Comprehensive Analytical Characterisation Methodologies. 2019. http://hdl.handle.net/11375/24779