McMaster University
An Axial-Flux Switched Reluctance Motor for Light Electric Vehicles
Abstract
dc:description.abstractIn an increasingly urgent climate crisis, the use of electric powertrains in smaller, purpose-built vehicles can expedite the global adoption of electrification. This thesis discusses the detailed design of an axial-flux switched reluctance motor for application in a light electric vehicle, such as an E-motorcycle. A vehicle application is studied based on typical driving conditions in an urban environment. The requirements of the propulsion motor are extracted, and a baseline machine topology is analyzed for its performance and manufacturability, towards the goal of a functional prototype. The prototype design includes a self-supporting foil winding, designed to maximize the use of axial space and allow for good conductive heat transfer to the machine casing. The rotor structure is found to be a limiting factor, where maximum speed is limited by the mechanical stresses. The performance of the motor is analyzed in detail, beginning with a numerical iron loss model that is implemented to provide faster simulation time of the machine efficiency than FEA. The efficiency is found to peak at 90%, comparable with other traction motors of similar size on the market. The switching angles are studied, and the trade-offs between torque quality and efficiency are quantified over the drive cycle. It was determined that the vehicle could save 19.6 Wh/km by accepting poor torque quality and operating with the most efficient control parameters. Thermal analysis is performed to determine the realistic performance limitations. The machine was found to have power ratings of 7.12 kW instantaneous and 4.76 kW continuous. The final temperature of the winding during the drive cycle was predicted not to exceed the temperature ratings of the insulation system. Finally, the prototype is assembled, and a test plan is outlined for qualification of the motor.
Degree
thesis:*- Department dc:contributor.department
- Mechanical Engineering
- Year dc:date.issued
- 2020
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Jack Gillies
- Advisor dc:contributor.advisor
-
- Ali Emadi, Berker Bilgin
Subjects
dc:subject × 1Rights
- Language dc:language.iso
- en
Identifiers
dc:identifier.*- Identifier URI
- https://doi.org/10.71548/18171