Back to search

McMaster University

SYSTEM-LEVEL INTERACTIONS BETWEEN ROCKING WALLS AND HOLLOW-CORE SLABS

Abstract

dc:description.abstract

Conventional fixed base walls are typically characterized by yielding that results in permanent damage, residual drifts and costly losses due to the service shutdown for structural repairs. Controlled rocking masonry walls have been developed as a solution to prevent structural damage when seismic events take place. These systems purposely allow the wall to rock from its foundation and have an uplift at the base, thus replacing the typical yielding at the base of conventional fixed-base walls. Controlled rocking masonry walls have traditionally been controlled by using unbonded post-tensioning strands to provide the self-centering behaviour. Although post-tensioning has shown favourable results, its implementation is difficult in practical applications, and post-tensioning losses due to yielding of the strands at large deformations can reduce their self-centering ability. In order to overcome such issues, an alternative controlled rocking system for masonry walls was developed recently, which is designed to self-center through vertical gravity loads only, instead of the post-tensioning tendons. The rocking response of this alternative system is controlled by using energy dissipation devices, so the system is referred to as Energy Dissipation-Controlled Rocking Masonry Walls (ED-CRMWs). The vertical gravity loads are primarily transferred to the ED-CRMWs from the floor slab at each level. Therefore, the wall-slab interaction should be investigated in order to ensure a fully resilient system. In this regard, the current study identifies and categorizes the potential issues that are expected to occur due to the interaction between the wall rocking mechanism and the floor slab, and then investigates the most common of these issues using a parametric study. The parametric study focuses on the vertical incompatibility of displacements that a hollow- core slab suffers when its supporting walls uplift by different displacements during seismic events. Three different spans, four different cross-sections and two different alternatives of prestress configurations are considered in this study. The models were developed using ABAQUS 6.18 commercial software. The results show the cracking/yielding behaviour of the slabs and their displacement capacities at five different stages. The obtained results are promising for the usage of hollow-core slabs on ED-CRMWs or similar systems that require this interaction, as the range of displacement capacities can accommodate many of the vertical displacement incompatibilities expected in many potential situations.

Degree

thesis:*
Department dc:contributor.department
Civil Engineering
Year dc:date.issued
2022

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Camarillo Garduño, Oscar
Advisors dc:contributor.advisor
  • Wiebe, Lydell Andree
  • Ezzeldin, Mohamed

Subjects

dc:subject × 1

Rights

Language dc:language.iso
en

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
McMaster University
Base URL
macsphere.mcmaster.ca/server/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Camarillo Garduño, Oscar. SYSTEM-LEVEL INTERACTIONS BETWEEN ROCKING WALLS AND HOLLOW-CORE SLABS. 2022. http://hdl.handle.net/11375/27684