Back to search

McMaster University

Electromagnetic Compatibility, Fault-Tolerance, and Efficiency Enhancements of High-Current Bidirectional 28-V Vehicular Auxiliary Power Modules

Abstract

dc:description.abstract

28 V low-voltage DC distribution is standardized in aerospace and special-purpose ground vehicle applications. Recent advances in these vehicular applications have led to the use of high-gain, high-current-capable DC/DC converters, often delivering currents in the order of several hundred amperes. This power converter, which serves as the interface between the high-voltage and low-voltage DC buses, is referred to as the auxiliary power module (APM). The rise of emerging vehicular microgrid architectures has created a demand for steady-state, bidirectional operation of the APM, a capability that has traditionally not been required. Two-stage DC/DC converters, typically consisting of a pre- or post-regulator stage followed by a DC Transformer (DCX) stage, provide an almost constant efficiency across the operating voltage range and are strong topology options for bidirectional APM applications. This thesis aims to introduce improvements across multiple aspects of bidirectional operation, while enhancing reliability, fault tolerance, and electromagnetic compatibility, which are crucial for the aforementioned safety-critical applications. To maintain bidirectionality, an electromagnetic interference (EMI) filter is mandatory for compliance and is a major contributor to volume within the APM. First, the EMI signatures in low-voltage to high-voltage operation (reverse mode) are compared for two DCX options: the Series-Resonant (SR-DCX) and the Dual Active Bridge (DAB-DCX). A differential-mode EMI filter is then designed to meet emission standards, and a common-mode EMI filter is estimated based on the required attenuation burden. This analysis shows that the SR-DCX would need a smaller overall filter volume. Second, bidirectional APMs require switching devices with low on-state resistance, a context in which conventional desaturation protection is ineffective for rapidly detecting overcurrent, short-circuit, or paralleled-device failures. To address this, a planar pickup-coil-based mixed-signal fault-detection scheme is proposed, capable of identifying device-paralleling failures and overcurrent faults in configurations with up to three paralleled MOSFETs. Third, the failure-mode analysis of the SR-DCX reveals that the resonant capacitor represents a single point of failure. To address this, a new approach is proposed that employs a high-frequency planar Rogowski coil to simultaneously detect both short-circuit and partial open-circuit faults in the SR-DCX resonant capacitor, while also enabling recovery from open-circuit failures. Fourth, the developed planar Rogowski coil is used to perform current-based bidirectional synchronous rectification of the SR-DCX, thereby reducing reverse conduction on the high-frequency link caused by long-term parameter drift. In summary, this thesis proposes advancements in reverse-mode electromagnetic compatibility, fault detection, fault tolerance, and runtime efficiency for a two-stage bidirectional APM used in 28 V vehicular applications.

Degree

thesis:*
Department dc:contributor.department
Electrical and Computer Engineering
Year dc:date.issued
2026

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Pradhan, Rachit
Advisor dc:contributor.advisor
  • Emadi, Ali

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial 4.0 International
Language dc:language.iso
en_US

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
McMaster University
Base URL
macsphere.mcmaster.ca/server/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Pradhan, Rachit. Electromagnetic Compatibility, Fault-Tolerance, and Efficiency Enhancements of High-Current Bidirectional 28-V Vehicular Auxiliary Power Modules. 2026. https://hdl.handle.net/11375/33163