McMaster University
Virtual Sensors Applied to a 7-degree-of-freedom Robotic Manipulator for Space Applications
Abstract
dc:description.abstractRobotics has been fundamental to the expansion of the space sector, especially robotic manipulators. Robotics can be seen supporting spacecraft through onboard maintenance, for example, Canadarm on the Space Shuttle and Canadarm2 on the International Space Station (ISS). An important aspect of robotic manipulator control is modulating the force and torque at the robot's end-effector to ensure precision wrenching tasks are done to specification; therefore, some form of feedback is required for control. A common way to measure said force and torque is using a 6-axis force-torque sensor (FTS), which is usually mounted between the final joint and the tool. There are a few caveats when using these sensors: they are expensive relative to the rest of the robot, require calibration and maintenance, and experience drift in extreme environments such as space due to the inevitable mechanical deformations. Therefore, the literature has sought to eliminate these sensors while maintaining precise control. One approach is to use virtual sensors, a software construct that outputs measurements, just like their physical counterparts, by combining analytical and non-deterministic methods with other reliable sensor measurements, such as motor and link-side encoder counts. This research focuses on the design and development of a 7-degree-of-freedom (DOF) robotic arm test bed and the application of various virtual force sensors on said test bed.
Degree
thesis:*- Department dc:contributor.department
- Mechanical Engineering
- Year dc:date.issued
- 2026
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Kosierb, Patrick
- Advisor dc:contributor.advisor
-
- Gadsden, S. Andrew
Subjects
dc:subject × 5Rights
- Language dc:language.iso
- en
Identifiers
dc:identifier.*- Identifier URI
- https://doi.org/10.71548/117