McMaster University
Design and Performance Analysis of a Two-Step Time-to-Digital Converter using Time Amplification
Abstract
dc:description.abstractSingle-photon avalanche diodes (SPADs) have emerged as key enabling devices for time-resolved sensing applications due to their ability to detect individual photons with high timing precision and their compatibility with standard CMOS technologies. When combined with high-resolution Time-to-Digital Converters (TDCs), SPAD-based systems enable accurate timestamping of photon detection events, which is critical in applications such as biomedical imaging, time-of-flight sensing, etc. As system requirements continue to evolve, improving TDC resolution while maintaining moderate to high dynamic range, low power consumption, and compact silicon area remains a significant challenge. Beyond sensing applications, TDCs are also widely employed in all-digital phase-locked loops and time-interleaved analog-to-digital converters (ADCs), where precise time quantization is essential for phase detection, timing calibration, and mismatch correction. This thesis focuses on the design and implementation of a time-amplified, two-step gated ring-oscillator-based Time-to-Digital Converter intended for integration with SPAD-based sensor interface and time-domain systems. First, a comprehensive review of existing TDC architectures and their applications is presented, highlighting key performance metrics, architectural trade-offs, and recent advances. Based on this review, a 9-bit two-step time-amplified TDC architecture is proposed and implemented in a TSMC 65-nm CMOS process. The design methodology is discussed in detail, covering architectural selection to fabrication. Measured results demonstrate that the proposed TDC achieves a time resolution of 4.401 ps, a dynamic range of 2.186 ns, and occupies a silicon area of only 0.012 mm², while maintaining low power consumption of 1.116 mW. To demonstrate system-level applicability, the proposed TDC is further applied in the design of a 9-bit time-domain analog-to-digital converter, illustrating its suitability for time-based signal processing. Post-layout simulation results demonstrate that the proposed ADC achieves an effective resolution of 8.3 bits, and occupies a silicon area of 0.0145 mm², while maintaining low power consumption of 1.226 mW. Finally, key research challenges and future directions for time-amplified and time-domain data converters are discussed, with emphasis on scalability, integration with SPAD-based systems, and performance optimization in advanced CMOS technologies.
Degree
thesis:*- Department dc:contributor.department
- Electrical and Computer Engineering
- Year dc:date.issued
- 2026
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Abdullah, Md Anas
- Advisors dc:contributor.advisor
-
- Elamien, Mohamed B.
- Deen, M. Jamal
Subjects
dc:subject × 8Rights
- Language dc:language.iso
- en
Identifiers
dc:identifier.*- Identifier URI
- https://doi.org/10.71548/163