Back to search

McMaster University

The Electron Spectrometer Telescope for the PRESET Mission: Instrument Design and Technical Development

Abstract

dc:description.abstract

The Electron Spectrometer Telescope (EST) aboard the PRESET satellite mission aims to measure the pitch angle distribution of 0.3-4MeV electrons in the outer Van Allen belts. The PRESET satellite is planned to launch into a sun-synchronous low Earth orbit in Q2, 2026. The EST consists of a stack of silicon strip detectors and a collimator to take pitch-angle dependent electron spectral measurements with a target angular resolution of 10\circ while rejecting the proton, heavy ion and gamma detection events using timing and energy coincidence logic. Comprehensive Monte Carlo simulations are performed to optimize the design and response of the EST instrument. The number of detectors and thickness of the silicon detector stack is determined and a novel split pin-hole collimator is designed to maximize angular resolution. The angular response simulated for the optimum design of the EST showed a resolution of 5.5\circ while being sensitive to electrons with energies from 0.1-5MeV. The BB37(SS) silicon strip detectors defined during Monte Carlo simulation work are manufactured and tested to verify performance through IV curve testing and spectrometry. A VATA460.3 ASIC designed for silicon strip detector read out is tested for performance before integration with the BB37(SS) detectors. The integrated detector-ASIC system is tested under a variety of check sources and pulser settings to confirm performance and determine acceptable system architectures for the EST electronics. During development of the EST a secondary instrument used for testing electronics and pulse processing architectures on high altitude balloon flights was developed. The High Altitude Electron Spectrometer Telescope (HAEST) was developed to test electrical and pulse processing architectures in a near space environment for later use on the EST. Energy and timing coincidence logic was implemented online, allowing a full spectrum to be directly extracted from the instrument. Performance of HAEST is compared with a commercial pulse processing system with offline coincidence, showing comparable performance. This work successfully develops the design and architecture of the EST, while providing a clear path towards a flight model version of the instrument and insight into the expected instrument performance. Extensive discussions on future work for both the EST and HAEST are provided along with future research directions.

Degree

thesis:*
Department dc:contributor.department
Physics
Year dc:date.issued
2026

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Dyer, Benjamin
Advisor dc:contributor.advisor
  • Byun, Soo Hyun

Subjects

dc:subject × 5

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-ShareAlike 2.5 Canada
Language dc:language.iso
en

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
McMaster University
Base URL
macsphere.mcmaster.ca/server/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Dyer, Benjamin. The Electron Spectrometer Telescope for the PRESET Mission: Instrument Design and Technical Development. 2026. https://hdl.handle.net/11375/33371