Back to search

McMaster University

DC-Link Ripple-Based Communication in Power Electronics for Cyber-Physical Systems: Theory and Applications to Electric Vehicles

Abstract

dc:description.abstract

Power-electronic systems in electric vehicles (EVs) are increasingly integrated with sensing, computation, and communication, forming power-electronic-based cyber-physical systems (PE-CPSs). While such integration enhances system functionality, it also makes communication channels potential single points of failure under faults or cyber-physical attacks. This thesis investigates DC-link ripple-based power-signal co-transmission (PSCT) as a communication-network-independent backup communication mechanism for EV power converters. First, a resilience framework for PE-CPSs is established to motivate backup communication as an enabling layer for degraded operation and recovery. Based on the EV powertrain architecture, this thesis then analyzes the feasibility of using the high-voltage DC link shared by the traction inverter and the auxiliary power module as a communication medium. For inverter-originated communication, closed-form expressions for the first- and second-order DC-link switching harmonics under 5- and 7-segment space vector pulse width modulation (SVPWM) are derived. A ripple-amplitude-based keying method is developed, and its decision variable, bit rate, latency, signal-to-noise ratio, and bit-error performance are analyzed and validated by simulation and experiment. To address the operating-point dependence of inverter DC-link ripple, an improved carrier-state keying method is further proposed. By using the carrier phase as an additional degree of freedom and detecting the differential phase of the switching harmonic through a sliding-window discrete Fourier transform (DFT), the method mitigates harmonic nulling and amplitude variation caused by changes in fundamental frequency, modulation index, and power factor. Finally, a transmitter--receiver co-design method is developed for communication from a dual-active-bridge (DAB) converter to the traction inverter. A reduced-order model of the DAB-induced input ripple and an undersampling-based receiver are used to guide frequency planning under DAB power regulation and inverter sampling constraints. Overall, this thesis demonstrates that DC-link ripple can be used as a low-cost backup communication carrier for EV power-electronic systems while preserving the primary power-conversion functions.

Degree

thesis:*
Department dc:contributor.department
Electrical and Computer Engineering
Year dc:date.issued
2026

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Liu, Chang
Advisor dc:contributor.advisor
  • Emadi, Ali

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language.iso
en

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
McMaster University
Base URL
macsphere.mcmaster.ca/server/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Liu, Chang. DC-Link Ripple-Based Communication in Power Electronics for Cyber-Physical Systems: Theory and Applications to Electric Vehicles. 2026. https://hdl.handle.net/11375/33546