Back to search

McMaster University

Design and Control of Multilevel Three-Port DC-DC Converters in Electric Medium- and Heavy-Duty Vehicles

Abstract

dc:description.abstract

Electric medium- and heavy-duty vehicles (eMHDVs), compared to their gasoline counterparts, are a promising solution in alleviating the global dependence of fossil fuel energy in the transportation sector. However, the increased vehicle mass, resulting from large energy storage capacities and powertrain upgrades, necessitates advancements in research to improve eMHDV performance. Growing power and voltage needs of the powertrain, high-voltage (HV) battery, and auxiliary loads must be addressed to facilitate a bridge towards the metrics of conventional MHDV builds. Three-port converters (TPCs), which integrate the back-end DC-DC converter of the on-board charger (OBC) and the auxiliary power module (APM) into a single converter, are therefore the focus of this thesis. The practicality of OBCs in eMHDVs across the wide spectrum of vehicle configurations, vocations, and weight classes is first studied. Analysis of powertrain specifications from 93 state-of-the-art (SOA) vehicle models combined with 23,000 days of fleet data reveal long available off-shift charging times and relatively low SOA battery capacities, thereby confirming the suitability of OBCs. Elevated power requirements of HV and low-voltage (LV) auxiliaries are then identified from industrial products along with the trend towards 48 V LV architectures in eMHDVs. Subsequently, a comprehensive topology review of three-port integrated OBC and APMs is conducted, highlighting key technological gaps and identifying the primary focus areas of TPC research within the light-duty vehicle sector. The emergence of electric vehicle (EV) standards, including SAE J3068, MCS, CHAdeMO 3.0, and ISO 21780, introduces new challenges for OBCs, APMs, and TPCs in eMHDVs. The remainder of the thesis therefore studies TPCs for deployment in the United States (U.S.), requiring compatibility with a wide grid three-phase line-to-line voltage of 208–480 V, a maximum HV battery pack rating of 1.25 kV, and 48 V auxiliary systems. Targeting an 11 kW application, a comparative analysis is performed for new TPC variants employing port topologies with a current doubler (CD) and a three-level neutral point clamped full-bridge (3L NPC FB). Based on optimized designs, performance, cost, and controllability are evaluated, revealing key difficulties of the CD variant and the strong suitability of a 3L NPC FB to interface the 1.25 kV port. To address the wide input voltage from the power factor correction (PFC) DC link, a novel reconfigurable multilevel triple active bridge (RMLTAB) converter is proposed in this thesis. Seven degree-of-freedom (DoF) and four-DoF modulation schemes for three-port and two-port operation, respectively, are presented. Frequency domain modelling using generalized harmonic approximation (GHA) is derived for the RMLTAB, where a developed loss minimized optimization framework is used for control variable determination. In addition, a new design optimization methodology is presented for the selection of switching frequency, turns ratio, and leakage inductances, generalizable to the broad class of TPCs. The control and design approaches are experimentally validated on an 11 kW hardware demonstrator of the RMLTAB interfacing DC voltages of 300–700 V, 890–1250 V, and 36–52 V achieving a peak efficiency of 97.4% and a power density of 2.07 kW/L. Furthermore, a holistic simplified closed-loop decoupling control strategy is proposed for the RMLTAB in three-port operation, addressing compensator design ambiguities, system non-linearities, and an efficient means of feed-forwarding optimal values of the seven-DoF. Compared to the conventional methodology, the simplified approach achieves 35% lower computation overhead and a peak 81% improvement in decoupling during an opposing port load change.

Degree

thesis:*
Department dc:contributor.department
Electrical and Computer Engineering
Year dc:date.issued
2026

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Kyle Kozielski
Advisors dc:contributor.advisor
  • Emadi, Ali
  • Narimani, Mehdi

Rights

Language dc:language.iso
en

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
McMaster University
Base URL
macsphere.mcmaster.ca/server/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Kyle Kozielski. Design and Control of Multilevel Three-Port DC-DC Converters in Electric Medium- and Heavy-Duty Vehicles. 2026. https://hdl.handle.net/11375/33574