Back to search

McMaster University

Effects of Doping on Functional Properties of CoSi2: Experiments and First-principles investigations

Abstract

dc:description.abstract

As integrated circuits scale below 10 nm, conventional copper interconnects encounter a critical performance bottleneck driven by the resistivity size effect and the prohibitive volume fraction consumed by highly resistive diffusion barriers, jointly amplifying the resistance–capacitance (RC) delay. Cobalt disilicide (CoSi2) offers intrinsically low resistivity, a cubic fluorite-type structure with space group F m¯3m, high thermal stability, and direct compatibility with silicon processing. Hence, it is a compelling alternative for contact-level metallization and local interconnects, yet its behavior as a tunable doped and/or alloyed system remains insufficiently understood. This thesis investigates how non-magnetic coinage-metal doping/alloying with Cu, Ag, and Au, modifies the coupled structural, electrical, thermal, and magnetic transport properties of CoSi2. Polycrystalline Co(1−x)M(x)Si2 systems, where M = Cu, Ag, or Au and x = 0–0.025 were fabricated by arc melting under inert argon. Co(1−x)Cu(x)Si2 (where, x = 0–0.015) single crystals were additionally grown by the crucible-free optical floating-zone (OFZ) technique, providing a grain-boundary-free platform that decouples intrinsic alloy-scattering contributions from extrinsic microstructural effects present in the polycrystalline series. Powder X-ray diffraction (PXRD) with Co Kα radiation, λ = 1.79 ˚A, over 2θ = 15◦–122◦, followed by Rietveld refinement, confirmed retention of the cubic fluorite parent phase across all compositions. Cu incorporation yields minimal lattice expansion to a = 5.36359 ˚A, corresponding to a maximum unit-cell volume expansion of 0.03%, whereas Ag and Au doping produces detectable elemental secondary phases at all doping levels owing to their limited lattice solubility. Complementary SEM/EDX and HAADF-STEM analysis provided compositional and microstructural characterization spanning micron to atomic length scales. Temperature-dependent physical properties from 2 to 300 K demonstrate that dilute alloying systematically tunes transport without disrupting the metallic ground-state. Four-probe resistivity measurements analyzed within the generalized Bloch–Gruneisen framework show that Cu doping in single crystals achieves the strongest intrinsic electrical optimization, reducing residual resistivity by over 55%, compared with approximately 30% in the polycrystalline Cu series for 1.5 at% Cu on Co sublattice. In the polycrystalline Ag and Au series, Ag yields a systematic approximately 30% reduction with an optimum near 1.5 at.% Ag on Co sublattice, while Au exhibits a non-monotonic response with a maximum reduction of approximately 21% at 0.5 at.% Au on Co sublattice, consistent with its greater tendency toward microstructural segregation. Low-temperature specific heat confirms the metallic baseline, with undoped reference parameters γ = 3.02×10−2 J/kg K2 and β = 0.4.33×10−4 J/kg K4. Total thermal conductivity at 300 K decreases from approximately 42.3 W/mK for undoped CoSi2 to approximately 37.5, 30.8, and 28.1 W/mK for the 2.5% Cu-, Ag-, and Au-doped sample specimens, respectively, a suppression driven predominantly by attenuation of the electronic thermal conductivity. SQUID M–H magnetometry further establishes that core-corrected molar susceptibilities remain weakly paramagnetic and tightly bounded between 5.26×10−5 and 6.04 × 10−5 cm3/mol across all compositions from 2 and 298 K, confirming full preservation of the intrinsic non-magnetic metallic ground state under coinage-metal doping. To provide atomic-scale mechanistic context as a complement to the experimental findings, first-principles DFT calculations using VASP with a 500 eV plane-wave cutoff and 2 × 2 × 2 supercells, confirm that Co-3d states dominate at the Fermi level and that metallic band crossings are preserved for all dopants. Formation energy analysis indicates that interstitial-site substitution is energetically preferred for Cu while Si-site is preferred in Ag and Au; however, Co-site substitution is electronically less disruptive to the host metallic framework for all three dopants and thus provides the more relevant model for interpreting the observed transport preservation. Phono3py lattice-dynamics modeling further demonstrates that Cu, Ag, and Au substitutions on Co-site suppress lattice thermal conductivity. Collectively, this integrated synthesis–characterization–modeling framework establishes dilute coinage-metal alloying as a rational, non-magnetic strategy for tuning the scattering landscape of CoSi2, with Cu optimal for resistivity minimization and Au most effective for total thermal-conductivity reduction and provides a foundation for engineering metallic silicides in next-generation nanoscale microelectronic applications.

Degree

thesis:*
Department dc:contributor.department
Materials Science and Engineering
Year dc:date.issued
2026

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Kulkarni, Kaustubh Shriram
Advisor dc:contributor.advisor
  • Niewczas, Marek

Subjects

dc:subject × 16

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivs 2.5 Canada
Language dc:language.iso
en

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
McMaster University
Base URL
macsphere.mcmaster.ca/server/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Kulkarni, Kaustubh Shriram. Effects of Doping on Functional Properties of CoSi2: Experiments and First-principles investigations. 2026. https://hdl.handle.net/11375/33614