Optica Publishing Group
Development of Low-Power Switchable True Time Delay Elements on a Silicon Photonics Platform for Applications in Photonic Beamforming
Abstract
dc:description.abstractOptical beamforming networks (OBFNs) based on true-time-delay (TTD) architectures offer a promising approach to mitigating beam-squint challenges inherent in conventional phased array antennas (PAAs). This thesis investigates the design, fabrication, and testing of an all-silicon-photonic switchable delay-line (SDL) system tailored for broadband microwave photonic beamforming. The SDL employs thermo-optic Mach-Zehnder interferometer (TO-MZI) switches alongside paper-clip-shaped spiral passive delay elements to generate reconfigurable optical delays, which are then converted into true-time-delayed RF signals via photodetection. Evaluations of SDLs range from single-bit to eight-bit configurations, with each TO-MZI selecting between no-delay and incremental-delay states, covering a delay range from one to hundreds of picoseconds. Optimization efforts focused on minimizing loss (~0.17 dB/cm), maximizing delay density (~142 ps/cm), and achieving compact delay elements (~1 ns/mm2). Experimental results indicated that wavelength-dependent optical delays worsened with increasing bit count, affecting delay accuracy and spectral uniformity. Sensitivity to fabrication variations, particularly in directional couplers and switches, led to spectral mismatches and multipath interference, which impeded digital delay formation and introduced analog variations as the bit count increased. These findings highlight the importance of iterative design processes, fabrication-aware inverse design, real-time monitoring with closed-loop control, predefined delay states, and calibration routines to enable scalable silicon-photonic OBFNs. Improving OBFN performance requires enhancing the TO-MZI switch through advanced design, control strategies, and post-processing techniques. The presented experimental results explore trade-offs in thermal crosstalk, device footprint, switching power, and switching speed. The results show that optimizing the gap between the interferometric waveguide arms and the micro-heater width is critical—an aspect not addressed comprehensively. Additionally, post-processing using focused ion beam techniques achieved nearly a 100-fold reduction in switching power. The study also investigates a novel approach employing differential control to expedite switching, resulting in approximately a 30% reduction in switching time.
Degree
thesis:*- Department dc:contributor.department
- Engineering Physics
- Grantor dc:publisher
- Optica Publishing Group
- Year dc:date.issued
- 2026
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Islam, Mohammad Rezaul
- Advisor dc:contributor.advisor
-
- Knights, Andrew
Subjects
dc:subject × 3Rights
- Language dc:language.iso
- en
Identifiers
dc:identifier.*- ISSN
- 1520-8540
- Identifier URI
- https://doi.org/10.71548/25532
- Dc Identifier Citation
- M. Islam, M. Mendéz-Rosales, R. Das, and A. Knights, "Crosstalk-assisted thermo-optic switching on a silicon photonics platform," J. Opt. Soc. Am. B 43, 967-975 (2026).