Back to search

McMaster University

Polyelectrolyte Adsorption onto Cellulose

Abstract

dc:description.abstract

This thesis investigates polyelectrolyte adsorption onto porous bleached Kraft pulp fibers, with emphasis on interpreting adsorption isotherms, increasing fiber-surface carboxyl content, and improving paper wet strength. A new framework was developed for analyzing adsorption of polydisperse polymers by expressing adsorbed and unadsorbed polymer on a common mass basis and applying mass-balance relationships. The method yields physically meaningful parameters describing the maximum fully adsorbed dose, polymer access to internal fiber pores, adsorption on exterior surfaces, and isotherm ideality. Application of this framework to cationic polymer adsorption demonstrated that polymer molecular-weight distribution, fiber porosity, and surface modification jointly control polymer distribution within and on pulp fibers. Grafting poly(ethylene-alt-maleic acid) onto pulp substantially increased the negative charge of exterior fiber surfaces and tripled exterior adsorption of polyamideamine–epichlorohydrin wet-strength resin at a grafted-polymer content of 4 mg/g. In contrast, TEMPO oxidation at comparable total fiber charge did not provide the same adsorption improvement, demonstrating the importance of charge location rather than total charge alone. A practical, water-based carboxylation process was also developed in which maleic acid copolymers adsorbed directly onto pulp in the presence of calcium ions at acidic pH, achieving complete attachment at a 3 mg/g dose without organic solvents or major new pulp-mill operations. Carboxylated pulp exhibited improved wet strength through both increased resin retention and enhanced covalent bonding. Poly(ethylene-alt-maleic acid) treatment increased wet tensile strength by 69%, while alternating polymer layers produced up to a 5.4-fold improvement. The thesis contributes new analytical tools, establishes the importance of topochemical charge distribution, and provides an industrially relevant route to stronger, value-added cellulose fibers.

Degree

thesis:*
Department dc:contributor.department
Chemical Engineering
Year dc:date.issued
2026

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Karami, Abdollah
Advisor dc:contributor.advisor
  • Pelton, Robert

Subjects

dc:subject × 2

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language.iso
en

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
McMaster University
Base URL
macsphere.mcmaster.ca/server/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Karami, Abdollah. Polyelectrolyte Adsorption onto Cellulose. 2026. https://hdl.handle.net/11375/33859