Back to search

McMaster University

Application of Dual Cycloconverters to a Double Fed Motor for Traction Drives

Abstract

dc:description.abstract

<p>Variable speed AC drives have become the new standard for high performance drive systems. Very high power traction drives present a particular challenge for AC drive technology because of the simultaneous need for high-torque vibration-free operation at standstill, traction-limited dynamic braking, and high speed operation.</p> <p>In this work, two independently controlled cycloconverters are used with a wound rotor machine to provide a double fed drive system that overcomes the frequency limitations of the cycloconverters and provides a stable high power drive, with potential for rapid torque response and power factor control.</p> <p>A new 'Jitter' control method is derived for the firing angle control of the cycloconverter. This method effectively spreads the cycloconverter output harmonics over a broader spectrum and thus minimizes the filtering requirements.</p> <p>The double fed motor (DFM) equations are applied to the DFM circle diagram and a simulation program has been written to plot the circle diagram and give a geometric interpretation of the developed torque. A new algorithm is proposed using δν, the pseudo torque angle, to give direct control of the torque using only position feed-back. A novel frequency hopping algorithm is also derived that allows the cycloconverters to be operated at high frequencies without generating harmonic torques.</p> <p>A dual cycloconverter drive was built to verify the stability and torque-speed performance of such a system. Reliable operation was achieved by using bank switching sensors based on detecting the reverse bias across a series connected diode, and by short circuit detection circuits with automatic reset facilities. The control software displays system status information on the screen, with on-line parameter modification, and provides a complete range of manual and automatic modes of operation to facilitate system development and testing.</p>

Degree

thesis:*
Department dc:contributor.department
Electrical Engineering
Year dc:date.issued
1989

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Brown, Murray Gerald
Advisor dc:contributor.advisor
  • Szabados, Barna

Subjects

dc:subject × 1

Identifiers

dc:identifier.*
Dc Identifier Other
opendissertations/1968
2933
1352745

Chain of custody

source
Harvested from
McMaster University
Base URL
macsphere.mcmaster.ca/server/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Brown, Murray Gerald. Application of Dual Cycloconverters to a Double Fed Motor for Traction Drives. 1989. http://hdl.handle.net/11375/6661