Back to search

McMaster University

Motion command generation for multi-axis machining

Abstract

dc:description.abstract

<p>In current industrial practice, the transformation of Computer-Aided Geometric Design surfaces into Computer Numerical Control (CNC) machine tool axis commands is performed with the aid of Computer-Aided Manufacturing software and a closed CNC machine tool controller. The advent of new technologies such as Open Architecture Control has enabled the rethinking of motion command generation. This thesis describes a five-axis motion command generation architecture and algorithms in which a parameterized tool-path is interpolated off-line and the inverse kinematics mapping is performed in real-time, on the CNC controller. This architecture eliminates the need for time consuming repost-processing of the tool-path in the event of kinematic changes and additionally introduces the benefits of parametric splines with controlled feedrate. To deterministically attain a near constant feedrate tool-path, near arc-length parameterized splines are prepared off-line. The C2 position spline which is near arclength parameterized improves on the previously reported research. The orientation unit vectors are interpolated with a C 2 spherical Bézier spline. These two splines are then synchronized by means of a monotonic reparameterization spline. This results in reduced effective feedrate oscillation. The interpolated tool-path and axis commands are demonstrated to be smooth and C2 continuous. To cope with actuator saturation, a feedrate interpolation algorithm is developed which ensures C2 continuity but allows the feedrate to be adjusted as needed. The developed algorithms were simulated for two tool-paths and two five-axis machines tools. A test part was cut to demonstrate geometric correctness.</p>

Degree

thesis:*
Department dc:contributor.department
Mechanical Engineering
Year dc:date.issued
2000

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Fleisig, Robert V.
Advisor dc:contributor.advisor
  • Spence, Allan D.

Subjects

dc:subject × 1

Identifiers

dc:identifier.*
Dc Identifier Other
opendissertations/2473
3450
1383792

Chain of custody

source
Harvested from
McMaster University
Base URL
macsphere.mcmaster.ca/server/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Fleisig, Robert V.. Motion command generation for multi-axis machining. 2000. http://hdl.handle.net/11375/7186