Back to search

McMaster University

Control of Slopping in Basic Oxygen Steelmaking

Abstract

dc:description.abstract

<p>Methods for controlling slopping (slag overflow) were studied in the Steel Company of Canada's Hilton Works basic oxygen furnace installation. A link was established between slopping and various operating conditions by drawing on the experience of the furnace operators and by examining ingot yield data. An on-line control system was developed which used changes in the temperature of the furnace waste gases to signal when corrective action should be taken to prevent slopping. During trials, this system reduced slopping and increased ingot yield by approximately one percent.</p> <p>The chemical composition of slag from normal and slopping heats was studied in an attempt to determine why slopping occurs. The results of this study support a mechanism proposed by F. Bardenheuer (Ref. 21) which relates increases in slag foaming in the B.O.F. to the precipitation of dicalcium silicate and overoxidation.</p>

Degree

thesis:*
Department dc:contributor.department
Metallurgy and Materials Science
Year dc:date.issued
1981

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Cuthill, George K.
Advisors dc:contributor.advisor
  • Lu, W-K.
  • Meadowcroft, T. R.

Subjects

dc:subject × 2

Identifiers

dc:identifier.*
Dc Identifier Other
opendissertations/2933
3947
1416849

Chain of custody

source
Harvested from
McMaster University
Base URL
macsphere.mcmaster.ca/server/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Cuthill, George K.. Control of Slopping in Basic Oxygen Steelmaking. 1981. http://hdl.handle.net/11375/7672