Back to search

McMaster University

MEASUREMENT OF DYNAMIC CUTTING FORCE COEFFICIENTS

Abstract

dc:description.abstract

<p>The dynamic behaviour of metal cutting process is investigated by measuring the various components of dynamic cutting force. For the complete description of dynamics of metal cutting it is necessary to give eight components belonging to the resultant dynamic cutting force in an orthogonal cutting process. These components originate from the two sides of chip, which under vibratory cutting conditions have undulations and are termed as inner and outer modulations respectively. The dynamic cutting forces are phase shifted with respect to their own modulations and are given respectively by real part and imaginary part of inner modulation, real part and imaginary part of outer modulation. Each of these four components are determined separately for main cutting force and thrust force and are specified as cutting force per unit amplitude of modulation per unit chip width, termed as dynamic cutting force coefficients. An experimental technique termed as the Double Modulation Method has been developed to measure the above eight coefficients for various cutting conditions of speed, feed, frequency, tool wear and work piece materials. The method is based on the Fast Fourier Transform of the measured signals of dynamic cutting forces and tool work piece relative displacement. The accuracy and reliability of the technique is established by comparing some of the results obtained from this method with those obtained from other two methods which are far simpler and conceptually more direct. These methods are termed as Kal's Method and Inner Modulation Method. The effects of various cutting conditions stipulated above on the individual coefficients have been investigated and the results are shown to be in agreement with the general practical observations. The result of stability analysis as performed by Moriwaki (21) using the coefficients measured in this work is included, to highlight the practical significance of the dynamic cutting force coefficients, for predicting the limit of stability.</p>

Degree

thesis:*
Department dc:contributor.department
Mechanical Engineering
Year dc:date.issued
1976

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Goel, B.S.
Advisor dc:contributor.advisor
  • Tlusty, J.

Subjects

dc:subject × 1

Identifiers

dc:identifier.*
Dc Identifier Other
opendissertations/3329
4356
1588262

Chain of custody

source
Harvested from
McMaster University
Base URL
macsphere.mcmaster.ca/server/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Goel, B.S.. MEASUREMENT OF DYNAMIC CUTTING FORCE COEFFICIENTS. 1976. http://hdl.handle.net/11375/8095