Back to search

McMaster University

Plastic Deformation and Fracture Behavior of AI-Mg and AI-Cr Alloys

Abstract

dc:description.abstract

<p>This research concerns a study of the deformation behavior and dislocation substructure characteristics resulting from plastic flow in single phase Al-Mg (0-4.11 at%Mg) and Al-Cr (0-0.36at%Cr) alloys. Tensile tests are performed at 298K, 78K, and 4.2K, and strain rate sensitivity tests are performed at 78K for the Ai-Mg alloys, and at 298K and 78K for the Al-Cr alloys. Resistivity measurements are carried out during tensile tests for all alloys deformed at 4.2K. The resulting structures are then studied using SEM and TEM microscopy. Solute strengthening is seen to occur in both systems, along with significant increases in strength and work hardening capacity in all alloys accompanying decreases in temperature. The limit for benefits from solute strengthening appears to lie close to the solubility limit for the Al-Mg system, but no clear limit is observed in the Al-Cr system. Resistivity data seems to indicate that a critical dislocation density is reached before fracture in all Al-Mg alloys studied, but that this critical density decreases with Cr content. Portevin Le-Chatelier (PLC) type instabilities are observed at room temperature in the Al-Mg alloys only, though both systems exhibit adiabatic shearing processes at 4.2K. A dislocation substructure resembling those observed in other Al-Mg alloys is observed, but the Al-Cr alloy dislocation substructure more closely resembles that observed in pure Al. Both substructures are seen to show greater dislocation density, distributed more homogenously over the structure as temperature decreases.</p>

Degree

thesis:*
Department dc:contributor.department
Materials Science and Engineering
Year dc:date.issued
2010

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Jobba, Mike
Advisor dc:contributor.advisor
  • Niewczas, M.

Subjects

dc:subject × 1

Identifiers

dc:identifier.*
Dc Identifier Other
opendissertations/4176
5194
2030046

Chain of custody

source
Harvested from
McMaster University
Base URL
macsphere.mcmaster.ca/server/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Jobba, Mike. Plastic Deformation and Fracture Behavior of AI-Mg and AI-Cr Alloys. 2010. http://hdl.handle.net/11375/9015