Back to search

McMaster University

Microstructure and Mechanical Properties of Al and Al/Si Alloyed TRIP-assisted Steels Produced through Galvanizing Heat Treatments

Abstract

dc:description.abstract

<p>TRIP-assisted steels combine high strength and good ductility, which makes them attractive to the automotive industry. Simultaneously, galvanizing is essential for the corrosion resistance of these steels. In industrial practice, the processing of TRIP-assisted steels and galvanizing process must be combined.</p> <p>Two Al-alloyed TRIP-assisted steels (<strong>1.0Al: </strong>O.2C-1.SMn-O.SSi-1.0Al (wt.%) and <strong>1.5Al: </strong>O.2C-1.SMn-1.SAl (wt.%)) were investigated in the present research work, where two points are noteworthy. First, the experimental processing routes in the present work are compatible with the continuous galvanizing process; second, it has been shown that the two steels exhibit good galvanizability. The initial microstructure and its evolution during plastic deformation of the two steels were examined. The kinetics of phase transformations taking place during thermal processing and plastic deformation were discussed. These results were linked to the work hardening behaviour with kinematic hardening taken into account.</p> <p>It was confirmed that the retained austenite in the steels obtained through the present galvanizing heat treatments contributed to the work hardening behaviour by transforming to martensite during plastic deformation. The 1.SAl steel exhibited a better work hardening behaviour due to the more stable retained austenite.</p> <p>Retained austenite of higher stability transformed to martensite more gradually during plastic deformation, efficiently attenuating decreases in the instantaneous work hardening rate, dσ/dε, and giving rise to a smoother evolution of the incremental work hardening coefficient, d(Lnσ)/d(Lnε). One of the attenuating mechanisms was the development of back stresses, which contributed kinematic hardening to the overall work hardening. Gradual transformation of retained austenite to martensite continuously supplied new obstacles to dislocations and delayed the saturation of back stresses.</p> <p>Based on the present work and the previous work, it seems possible to process galvanizable Al-alloyed TRIP assisted steels using continuous galvanizing thermal cycles, which implies the possibility to combine continuous galvanizing and thermal processing of TRIP-assisted steels.</p>

Degree

thesis:*
Department dc:contributor.department
Materials Science and Engineering
Year dc:date.issued
2009

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Bian, Yankui
Advisors dc:contributor.advisor
  • McDermid, J.R.
  • Zurob, H.S.

Subjects

dc:subject × 1

Identifiers

dc:identifier.*
Dc Identifier Other
opendissertations/4244
5262
2034258

Chain of custody

source
Harvested from
McMaster University
Base URL
macsphere.mcmaster.ca/server/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Bian, Yankui. Microstructure and Mechanical Properties of Al and Al/Si Alloyed TRIP-assisted Steels Produced through Galvanizing Heat Treatments. 2009. http://hdl.handle.net/11375/9090