Back to search

McMaster University

ADVANCED MATERIALS AND METHODS FOR THE FABRICATION OF ELECTROCHEMICAL SUPERCAPACITORS

Abstract

dc:description.abstract

<p>Nanostructured manganese oxides in amorphous or various crystalline forms have been found to be promising electrode materials for electrochemical supercapacitors (ES). Manganese dioxide nanofibers with length ranged from 0.1 to 1 μm and a diameter of about 3-10 nm were prepared by a chemical precipitation method. Electrophoretic deposition (EPD) method and mpregnation techniques have been developed to fabricate thin film and composite electrodes for ES. As-prepared nanofibers and electrodes were studied by transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), thermogravimetric analysis (TGA) and differential thermal analysis (DTA). The capacitive behavior of electrodes was investigated by cyclic voltammetry (CV) and chronopotentiometry method using a three-electrode cell in the mild Na<sub>2</sub>SO<sub>4</sub>.</p> <p>The composite electrodes fabricated by impregnation of manganese dioxide nanofibers and multi-walled carbon nanotubes (MWCNTs) into porous nickel foam and nickel plaque current collectors showed excellent capacitive performance with large material loading of 7-40 mg cm<sup>-2</sup> in 0.1-0.5 M Na<sub>2</sub>SO<sub>4</sub>. MnO<sub>2</sub> nanofibers and MWCNTs can form a porous fibrous network, which is beneficial for the electrolyte access to the active materials. In addition, MWCNTs formed a secondary conductivity network within the porous nickel structures. The highest specific capacitance (SC) of 185 F g<sup>-1</sup> was obtained at a scan rate of 2 mV S<sup>-1</sup> in the 0.5 M Na<sub>2</sub>SO<sub>4</sub> solutions. The effect of the electrolyte concentration, scan rate and active material composition on the capacitive behavior was discussed.</p> <p>Obtained thin film and composite electrodes by EPD showed a capacitive behavior in the 0.1 M Na<sub>2</sub>SO<sub>4</sub> aqueous solutions with a potential range of 0-1.0 V. The highest SC of 412 F g<sup>-1</sup> was obtained for the thin film electrodes at a scan rate 2 mV S<sup>-1</sup> in the 0.1 M Na<sub>2</sub>SO<sub>4</sub>. The SC decreased with increasing deposit mass and scan rate. It was found that the addition of MWCNTs can improve the capacitive performance of manganese dioxide electrodes with smaller equivalent series resistance (ESR). The mechanisms and kinetics of all the deposition methods were discussed.</p>

Degree

thesis:*
Department dc:contributor.department
Materials Science and Engineering
Year dc:date.issued
2009

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Li, Jun
Advisor dc:contributor.advisor
  • Zhitomirsky, I.

Subjects

dc:subject × 1

Identifiers

dc:identifier.*
Dc Identifier Other
opendissertations/4269
5288
2039119

Chain of custody

source
Harvested from
McMaster University
Base URL
macsphere.mcmaster.ca/server/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Li, Jun. ADVANCED MATERIALS AND METHODS FOR THE FABRICATION OF ELECTROCHEMICAL SUPERCAPACITORS. 2009. http://hdl.handle.net/11375/9117