Back to search

McMaster University

Chipping and Breakage of Carbide Tools

Abstract

dc:description.abstract

<p>The purpose of this project was to study the failure mechanisms of carbide tools in turning operations due to fracture of the cutting edge. The study consisted of a combination of turning tests, examination of fracture surfaces and an analysis of the stresses in the tool as produced by the cutting force. Thermal stresses are so far not considered. It is concluded that chipping is a ductile failure due to high shear stresses at the cutting edge and breakage is brittle fracture originating at the rake face at a local maximum of tensile stress.</p> <p>For the finite element stress analysis a new method of successively refining mesh while diminishing the analysed area is introduced which is rather effective and economical in that all computation except for the final field is done only once for various loading cases.</p>

Degree

thesis:*
Department dc:contributor.department
Mechanical Engineering
Year dc:date.issued
1976

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Masood, Abdel Meged Zaher
Advisor dc:contributor.advisor
  • Tlusty, J.

Subjects

dc:subject × 1

Identifiers

dc:identifier.*
Dc Identifier Other
opendissertations/462
1152
878153

Chain of custody

source
Harvested from
McMaster University
Base URL
macsphere.mcmaster.ca/server/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Masood, Abdel Meged Zaher. Chipping and Breakage of Carbide Tools. 1976. http://hdl.handle.net/11375/9502