Back to search

Michigan State University

High temperature behavior of polypropylene and polypropylene / glass composites

Abstract

dc:description

Solid state die drawing of polymer matrix composite materials offers an opportunity to make products that cannot be produced by any other method. This is done by heating a composite billet to a temperature just below the melting point and drawing it through a heated converging die by pulling from the downstream side. Since this is done at high temperatures, it is imperative to understand the behavior of the polymer and the composites at high temperature. Therefore, in this work, the stress-strain behavior of neat polypropylene and polypropylene composites with glass flake and glass bead fillers was studied at 23°C, 130°C, and 145°C. The onset of debonding was found to occur at a lower stress and strain for the composites tested at higher temperature, while the loss of reinforcement was slower at the elevated temperatures. The interfacial interaction between the filler and matrix was also determined to be greater at elevated temperatures. The presence of filler particles also changed the character of the stress-strain curves at higher temperatures. Specifically, the filler induced a sharper neck region in the composites at elevated temperature. Annealing for one hour at temperatures between 130°C and 145°C produced a secondary, lower melting temperature peak in the DSC curves, which increased in prominence with increasing temperature. This increase in prominence was greater for the composites than for the neat polymer. Finally, the onset of debonding was studied using transverse strain vs. stress curves for the two composites. The debonding stress decreased with increasing temperature for both materials, and it was determined that stress amplification at the interface is greater for the flake composite than for the bead composite.

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Shipley, Katherine Mary Herber
Contributors dc:contributor
  • Jayaraman, Krishnamurthy
  • Drzal, Lawrence T.
  • Lee, Andre
  • Liu, Dahsin
  • Michigan State University

Subjects

dc:subject × 4

Rights

dc:rights
Statement dc:rights
  • In Copyright
Language dc:language
English

Identifiers

dc:identifier.*
Identifier
etd:1358
isbn:9781124897998
isbn:1124897992
oclc:973325812
umi:1499816
local:Shipley_grad.msu_0128N_10762

Chain of custody

source
Harvested from
Michigan State University
Base URL
d.lib.msu.edu/oai
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Shipley, Katherine Mary Herber. High temperature behavior of polypropylene and polypropylene / glass composites. 2011. https://doi.org/doi:10.25335/m2sz-sk67