Back to search

Michigan State University

Backcalculation of layer moduli of granular layers for both rigid and flexible pavements

Abstract

dc:description

The resilient moduli (MR) of surface, base and subbase pavement layers and that of the roadbed soil are primary design input parameters to all pavement design software. The modulus values could be obtained from the laboratory using cyclic load tests or backcalculated from Falling Weigh Deflectometer (FWD) data (deflection data). In this study FWD data were used to backcalculate the modulus values of unbound granular materials supporting rigid and flexible pavements. The backcalculated MR values were then compared to those values obtained by Michigan Technological University (MTU) in the laboratory. The results show that on average the backcalculated MR values of the unbound granular layer are about four times higher than the laboratory determined MR. The pavement type and the aggregate characteristics, such as aggregate type and gradation, did not have any significant impact on the backcalculated MR values.

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Thottempudi, Ashvini Kumar
Contributors dc:contributor
  • Baladi, Gilbert
  • Buch, Neeraj
  • Haider, Syed

Subjects

dc:subject × 4

Rights

dc:rights
Statement dc:rights
  • In Copyright
Language dc:language
English

Identifiers

dc:identifier.*
Identifier
etd:1815
isbn:9781124390703
isbn:1124390707
oclc:931831888
umi:1483832
local:Thottempudi_grad.msu_0128N_10141

Chain of custody

source
Harvested from
Michigan State University
Base URL
d.lib.msu.edu/oai
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Thottempudi, Ashvini Kumar. Backcalculation of layer moduli of granular layers for both rigid and flexible pavements. 2010. https://doi.org/doi:10.25335/h2s2-4c91