Back to search

Michigan State University

Processing and nanostructure influences on mechanical properties of thermoelectric materials

Abstract

dc:description

Thermoelectric (TE) materials are materials that can generate an electric current from a thermal gradient, with possible service in recovery of waste heat such as engine exhaust. Significant progress has been made in improving TE conversion efficiency, typically reported according to the figure of merit, ZT, with several recent papers publishing ZT values above 2. Furthermore, cost reductions may be made by the use of lower cost elements such as Mg, Si, Sn, Pb, Se and S in TE materials, while achieving ZT values between 1.3 and 1.8. To be used in a device, the thermoelectric material must be able to withstand the applied thermal and mechanical forces without failure. However, these materials are brittle, with low fracture toughness typically less than 1.5 MPa-m<super>1/2</super>, and often less than 0.5 MPa-m<super>1/2</super>. For comparison, window glass is approximately 0.75 MPa-m<super>1/2</super>. They have been optimized with nanoprecipitates, nanoparticles, doping, alterations in stoichiometry, powder processing and other techniques, all of which may alter the mechanical properties. In this study, the effect of SiC nanoparticle additions in Mg<sub>2</sub>Si, SnTe and Ag nanoparticle additions in the skutterudite Ba<sub>0.3</sub>Co<sub>4</sub>Sb<sub>12</sub> on the elastic moduli, hardness and fracture toughness are measured. Large changes (~20%) in the elastic moduli in SnTe<sub>1+x</sub> as a function of x at 0 and 0.016 are shown. The effect on mechanical properties of doping and precipitates of CdS or ZnS in a PbS or PbSe matrix have been reported.Changes in sintering behavior of the skutterudite with the Ag nanoparticle additions were explored. Possible liquid phase sintering, with associated benefits in lower processing temperature, faster densification and lower cost, has been shown. A technique has been proposed for determining additional liquid phase sintering aids in other TE materials.The effects of porosity, grain size, powder processing method, and sintering method were explored with YbAl<sub>3</sub> and Ba<sub>0.3</sub>Co<sub>4</sub>Sb<sub>12</sub>, with the porosity dependence of the elastic moduli reported. Only one other TE material has the porosity dependence of the elastic moduli previously reported in the literature, lead-antimony-silver-tellurium (LAST), and the effect of different powder processing and sintering methods has never been reported previously on TE materials.

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Schmidt, Robert David
Contributors dc:contributor
  • Case, Eldon D.
  • Hogan, Timothy P.
  • Morelli, Donald T.
  • Sakamoto, Jeffrey S.
  • Michigan State University

Subjects

dc:subject × 2

Rights

dc:rights
Statement dc:rights
  • In Copyright
Language dc:language
English

Identifiers

dc:identifier.*
Identifier
etd:2972
isbn:9781321260977
isbn:1321260970
oclc:973326535
umi:3640631
local:Schmidt_grad.msu_0128D_13277

Chain of custody

source
Harvested from
Michigan State University
Base URL
d.lib.msu.edu/oai
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Schmidt, Robert David. Processing and nanostructure influences on mechanical properties of thermoelectric materials. 2014. https://doi.org/doi:10.25335/76e1-nk08