Back to search

Michigan State University

Backcalculation of asphalt concrete complex modulus curve by layered viscoelastic solution

Abstract

dc:description

In-situ evaluation of material properties is very important for estimating the structural adequacy of a pavement section under traffic loading. The fundamental material property for the AC layer in a flexible pavement is the complex modulus |E*| or the equivalent relaxation modulus E(t). In-situ |E*| can be used as a quality control tool as well as in estimation of remaining service life of existing pavements, and it is a critical input to the new Mechanism-Empirical Pavement Design Guide (M-E PDG). In this research, a method is presented to backcalculate |E*| or E(t) for the AC layer, in addition to base and subgrade layer moduli, using Falling Weight Deflectometer (FWD) surface deflection time histories. First, the deflection time histories from FWD test data were separated as the dynamic response part, and the viscoelastic response part: The time delay of each sensor is related to wave propagation through the pavement system while the shifted deflection time history without time delay can be considered as the viscoelastic response of the pavement. Second, the time delay of each sensor was used to estimate the elastic modulus of the subgrade layer, based on the wave propagation theory. Third, a forward layered viscoelastic solution was developed based on Schapery's `quasi-elastic' approximation. Finally, backcalculation was numerically done by Newton's method, and followed by the MATLAB internal function `fminsearch', to match the predicted deflection time histories from estimated modulus of each layer against the shifted measurement from the FWD test. The backcalculation results show very good agreement with the actual modulus values for both numerical examples and field FWD test data. The error in the base and subgrade moduli is generally less than 3%. The AC layer relaxation and complex modulus curves match the actual functions within the ranges of 0.0001 to 0.1 sec, and 10 to 10,000 Hz, respectively. The sensitivity analysis shows that errors in the deflection time-histories are the most significant factor affecting the backcalculated AC relaxation and complex modulus curves. Also, the layer thicknesses should be as accurate as possible.

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Lei, Ligang
Contributors dc:contributor
  • Chatti, Karim
  • Kutay, Muhammed E.
  • Baladi, Gilbert
  • Pence, Thomas

Subjects

dc:subject × 5

Rights

dc:rights
Statement dc:rights
  • In Copyright
Language dc:language
English

Identifiers

dc:identifier.*
Identifier
etd:611
isbn:9781124597003
isbn:112459700X
oclc:931842538
umi:3450675
local:Lei_grad.msu_0128D_10199

Chain of custody

source
Harvested from
Michigan State University
Base URL
d.lib.msu.edu/oai
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Lei, Ligang. Backcalculation of asphalt concrete complex modulus curve by layered viscoelastic solution. 2011. https://doi.org/doi:10.25335/rbfr-0g22