Back to search

Michigan Technological University

MODEL-BASED DESIGN AND HARDWARE-IN-THE-LOOP SIMULATION OF INTERNAL COMBUSTION ENGINE CONTROL SYSTEMS

Abstract

dc:description.abstract

This report studies model-based embedded system design for the control of Internal Combustion (IC) engines. The advantages of model-based design and the development tools are discussed. The application of this method for IC engine control is the focus of the first part of the report. In the second part, the Hardware-In-the-Loop (HIL) simulation is introduced with emphasis on the engine controller and its modification for lean operation control. For the IC engine control, the control functionalities of an engine electronic control unit (ECU) in dSPACE Automotive Simulation Models (ASM) are analyzed. The lean combustion control model is implemented in a hardware engine ECU - MotoTron Engine Control Module (ECM) and validated by a HIL simulator. The HIL simulator used for the simulation study is dSPACE E-Drive HIL simulator. The HIL simulation result shows that the developed lean combustion control strategy can reduce fuel consumption. The lean operation at a lambda value of 1.2 is seen to have the lowest injection duration while still producing the same amount of torque. It is also found that the implemented method is able to meet the required torque better at the lower load operating conditions. The variation in the output torque is increased at the higher load conditions.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Mechanical Engineering (MS)
Level thesis:degree_level
Master's report
Discipline thesis:degree_discipline
Department of Mechanical Engineering-Engineering Mechanics

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Agashe, Pushkar Vivek
Contributors dc:contributor
  • Bo Chen

Subjects

dc:subject × 3

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Michigan Technological University
Base URL
digitalcommons.mtu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Agashe, Pushkar Vivek. MODEL-BASED DESIGN AND HARDWARE-IN-THE-LOOP SIMULATION OF INTERNAL COMBUSTION ENGINE CONTROL SYSTEMS. Master's report thesis, https://doi.org/10.37099/mtu.dc.etd-restricted/254