Abstract
dc:description.abstractOverall weight of vehicle contributes significantly towards fuel efficiency. Components used in vehicle today have thicker section sizes than the actual requirement due to the manufacturing and material property restrictions in thinner sections. A better optimized component with combined use of improved design, material and manufacturing practices can reduce the weight of components by 40-50% which can in turn reduce the overall weight of vehicle and hence increase fuel efficiency. Differential case is selected as the component to be optimized from design point of view which is currently being used commercial vehicles. The design optimization process for reducing weight of differential case is discussed in this report. The main aim of this project is to figure out the best suitable process for design optimization of differential case. After finalizing on the process, finite element analysis is performed on the optimized part to check whether the stress is within limits. Differential case has ring gear attached to it which bears load due to pinion motion. 36 different load cases have been studied with load at every 10 degrees in order to take into account the location of maximum stress.
Degree
thesis:*- Name thesis:degree_name
- Master of Science in Mechanical Engineering (MS)
- Level thesis:degree_level
- Campus Access Master's Report
- Discipline thesis:degree_discipline
- Department of Mechanical Engineering-Engineering Mechanics
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Deshpande, Parag
- Committee members dc:contributor.committeemember
-
- Paul Sanders
- Paulus J van Susante
- Contributors dc:contributor
-
- Gregory Odegard
Subjects
dc:subject × 4Identifiers
dc:identifier.*- Identifier
- https://digitalcommons.mtu.edu/etdr/80