Back to search

Michigan Technological University

THE EFFECT OF SOLIDIFICATION RATE AND SOLUTIONIZING QUENCH RATE ON THE MECHANICAL PROPERTIES AND HARDENING RESPONSE OF ALUMINUM ALLOYS: A QUANTITATIVE COMPARISON

Abstract

dc:description.abstract

A comparative study of five aluminum alloys was performed to characterize the effect of solidification rate and quench rate on casting microstructure and properties. The alloys were cast in the geometry for Jominy End Quench (JEQ) testing, so as to take advantage of the JEQ test’s ability to give data on multiple quench rates in a single sample and illustrate the quench sensitivity of an alloy. While the Jominy End Quench test has been used in aluminum alloys, the effects of solidification rates have not been assessed in depth. The work done by other studies has either focused on a single alloy across multiple solidification rates, or on multiple alloys using a single solidification rate. To this end, three molds were created: a sand mold, a semi-permanent mold and a permanent mold, with the intent of casting JEQ bars out of multiple aluminum alloys for direct comparison. The tensile strength, hardness, porosity, and electrical conductivity were assessed, in an attempt to compare the quench sensitivities of the samples. This study will provide a starting point for more in-depth analyses of the alloys, i.e. the kinetics of precipitation strengthening over a range of length scales (cooling rates).

Degree

thesis:*
Name thesis:degree_name
Master of Science in Materials Science and Engineering (MS)
Level thesis:degree_level
Open Access Master's Thesis
Discipline thesis:degree_discipline
Department of Materials Science and Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Gil-Figueroa, Rafael
Committee members dc:contributor.committeemember
  • Greg Odegard
  • Adam Loukus
  • Walt Milligan
Contributors dc:contributor
  • Paul Sanders

Subjects

dc:subject × 1

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Michigan Technological University
Base URL
digitalcommons.mtu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Gil-Figueroa, Rafael. THE EFFECT OF SOLIDIFICATION RATE AND SOLUTIONIZING QUENCH RATE ON THE MECHANICAL PROPERTIES AND HARDENING RESPONSE OF ALUMINUM ALLOYS: A QUANTITATIVE COMPARISON. Open Access Master's Thesis thesis, https://doi.org/10.37099/mtu.dc.etdr/162