Back to search

Michigan Technological University

Effect of Fiber Orientation on Dynamic Compressive Properties of an Ultra-High Performance Concrete

Abstract

dc:description.abstract

Casting structural elements with ultra-high performance concrete (UHPC) tends to create preferential fiber alignment, which affects the strength and must be accounted for in design. Fiber orientation effects in tension have been studied extensively, but less work has been performed for compression. This work characterizes the fiber orientation occurring in a typical UHPC beam and how that orientation affects compressive behavior at high strain rates. Specimens (36 total) were cored from the beam and their fiber orientations were non-destructively evaluated using x-ray computed tomography (CT). Fibers showed flow-induced alignment along the length of the beam, with orientation angles in the x, y, and z-directions differing significantly. The perpendicular orientation number was used to describe orientation, as fibers perpendicular to the load were most effective in crack bridging. Cored specimens tested quasistatically achieved compressive strengths of 14.3–23.6 ksi, which appeared to increase with perpendicular orientation number. However, limited data makes this correlation uncertain. Quasistatic strengths were lower than expected due to the use of neoprene pads. Quasistatic strengths of cores tested without pads averaged 26.6 ksi. Dynamic tests at strain rates of 130–200 1/s were performed with a split-Hopkinson pressure bar (SHPB). Dynamic compressive strength ranged from 38.1 ksi to 58.5 ksi and was independent of orientation number, although results suggested that the distribution and orientation of fibers influenced crack formation. The strain at peak stress, a measure of ductility, ranged from 0.0105 to 0.0131 in dynamic tests. Strain at peak stress increased with perpendicular orientation number, but the correlation was weak. Sources of error, including stress non-equilibrium and radial confinement due to inertia, were assessed.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Civil Engineering (MS)
Level thesis:degree_level
Open Access Master's Thesis
Discipline thesis:degree_discipline
Department of Civil and Environmental Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Groeneveld, Andrew B.
Committee members dc:contributor.committeemember
  • C. Kennan Crane
  • Stephen L. Kampe
Contributors dc:contributor
  • Theresa M. Ahlborn

Subjects

dc:subject × 7

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Michigan Technological University
Base URL
digitalcommons.mtu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Groeneveld, Andrew B.. Effect of Fiber Orientation on Dynamic Compressive Properties of an Ultra-High Performance Concrete. Open Access Master's Thesis thesis, https://doi.org/10.37099/mtu.dc.etdr/163