Back to search

Michigan Technological University

EXPERIMENTAL STUDY, MODELLING AND CONTROLLER DESIGN FOR AN RCCI ENGINE

Abstract

dc:description.abstract

Low Temperature Combustion (LTC) has got widespread attention over the past two decades in the field of Automotive Research and Development due to it’s potential for achieving higher efficiencies with near-zero engine out NOx and soot emissions. Among all the LTC strategies Reactivity controlled compression ignition (RCCI) has shown the most promising results due to it’s precise control over combustion phasing and heat release rate. However, RCCI being a dual-fuel stratified combustion, precise control over the injection timing of direct injected fuel and in-cylinder fuel reactivity of the mixture needs to be controlled effectively in order to achieve gross indicated thermal efficiencies as high as around 60%. This thesis focuses on developing real-time, model-based controller for controlling combustion phasing of an RCCI Engine. Optimum combustion phasing can be achieved by varying mixture reactivity and injection timing of higher reactive fuel. An experimental study was performed to study the effects of these variables on combustion phasing. Next,a mean-value and dynamic control-oriented model (COM) was developed to predict combustion phasing during steady-state and transient operating conditions. The validation results have shown that the COM was able to capture the experimental trends with minimal error. Next, for implementing in real time, a PI controller was developed using the COM to track the desired combustion phasing by adjusting duel-fuel premixed ratio and start of injection timing. The PI controller is then implemented on the engine plant. The validation results proved that the designed controller can follow the desired combustion phasing with an average error of 2 crank angle degrees and rise time of 3 engine cycles.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Mechanical Engineering (MS)
Level thesis:degree_level
Open Access Master's Thesis
Discipline thesis:degree_discipline
Department of Mechanical Engineering-Engineering Mechanics

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Kondipati, Naga Nithin Teja
Committee members dc:contributor.committeemember
  • Bo Chen
  • David D. Wanless
Contributors dc:contributor
  • Mahdi Shahbakhti

Subjects

dc:subject × 7

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Michigan Technological University
Base URL
digitalcommons.mtu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Kondipati, Naga Nithin Teja. EXPERIMENTAL STUDY, MODELLING AND CONTROLLER DESIGN FOR AN RCCI ENGINE. Open Access Master's Thesis thesis, https://doi.org/10.37099/mtu.dc.etdr/185