Back to search

Michigan Technological University

Design and Fabrication of a Suspension Rig

Abstract

dc:description.abstract

Owing to its placement under the vehicle body, the suspension system is one of the parts of the vehicle which are difficult to comprehend completely, albeit being a vital component. For demonstrating the working of a suspension system, a physical model in which one can actually see the movement of all the components would be a great tool. A Mustang II independent front suspension system was purchased from Heidts Engineering Performance and a rig that can emulate some of the real world situations of vehicle suspension action was designed and fabricated. All the components are accessible and conditions like bounce, rebound and roll can be emulated manually using two jack screws. The rig was instrumented to measure the roll angle, the angle of the upper arm and the steering rotation. Motion simulation study of bounce, rebound and roll was done using NX 10 and the results were compared with the data obtained from the rig.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Mechanical Engineering (MS)
Level thesis:degree_level
Open Access Master's Report
Discipline thesis:degree_discipline
Department of Mechanical Engineering-Engineering Mechanics

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Philip, Abhijith Geo
Committee member dc:contributor.committeemember
  • Antonio Gauchia Babe
Contributors dc:contributor
  • John E Beard
  • Jeremy J Worm

Subjects

dc:subject × 9

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Michigan Technological University
Base URL
digitalcommons.mtu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Philip, Abhijith Geo. Design and Fabrication of a Suspension Rig. Open Access Master's Report thesis, https://doi.org/10.37099/mtu.dc.etdr/202