Back to search

Michigan Technological University

INVESTIGATION OF MECHANICAL, ELECTRICAL, AND THERMAL PROPERTIES OF PARTICULATE/FIBER/POLYMER COMPOSITES

Abstract

dc:description.abstract

Composites have many applications due to their high strength to weight ratio, chemical resistance, and the ability to tune properties like electrical resistivity (ER). In this work, polyetheretherketone (PEEK) and cycloaliphatic epoxy (CE) composites with different fillers were studied. PEEK composites contained up to 10 wt% Akzo Nobel Ketjenblack carbon black (CB), up to 15 wt% Asbury Carbons TC307 graphene nanoplatelets (GNP), up to 30 wt% Solvay carbon fiber (CF), and combinations of the three carbons. Formulations were developed for electrostatic dissipative and electrically conductive applications. The most conductive formulation was 7.5 wt% CB/30 wt% CF/PEEK, which had an electrical resistivity of 0.56 ohm-cm, a thermal conductivity twice that of the neat PEEK, a tensile strength of 145 MPa, and a tensile modulus of 18.4 GPa. CE composites have high voltage and temperature applications such as aluminum conductor composite core (ACCC) power transmission lines because of their high ER, high glass transition temperature (Tg), stiffness, and aging resistance. Cabot CB and fumed silica were tested in CE. The results showed that up to 2 wt% carbon black or 4 wt% fumed silica had little effect on the electrical, thermal, or tensile properties of CE. Asbury TC307 GNP was added to CE and aged at elevated temperature and moisture levels. The results from flexure and dynamic mechanical testing indicate that the addition of up to 4 wt% GNP provides modest improvements in the stiffness and Tg for all aging levels, while the strength is improved for aging times below 400 hours. Imerys Nicron talc and Potters Spheriglass glass microspheres (glass MS) were tested in CE. Thermal conductivity increased from 0.15 W/m-K for neat CE to 0.25 W/m-K for both 20 wt% talc/CE and 40 wt% glass MS/CE. Tensile modulus increased for both fillers, and compared well with predicted values from micromechanical models. The talc/CE composites were aged at elevated temperature and moisture levels. Talc reduced water absorption and did not negatively affect aging effects on flexural strength and stiffness. Prior to these experiments, properties of these composites had not been previously reported in the open literature.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy in Chemical Engineering (PhD)
Level thesis:degree_level
Open Access Dissertation
Discipline thesis:degree_discipline
Department of Chemical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Tomasi, Julie
Committee members dc:contributor.committeemember
  • Timothy Eisele
  • Ibrahim Miskioglu
  • Gregory Odegard
Contributors dc:contributor
  • Julia King

Subjects

dc:subject × 4

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Michigan Technological University
Base URL
digitalcommons.mtu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Tomasi, Julie. INVESTIGATION OF MECHANICAL, ELECTRICAL, AND THERMAL PROPERTIES OF PARTICULATE/FIBER/POLYMER COMPOSITES. Open Access Dissertation thesis, https://doi.org/10.37099/mtu.dc.etdr/687