Back to search

Michigan Technological University

DESIGN OPTIMIZATION OF BRAKE ROTOR USING CFD TECHNIQUES

Abstract

dc:description.abstract

The objective of this study was to determine the cooling characteristics of ventilated brake rotors using ANSYS CFD codes. Computational fluid dynamics (CFD) simulations were used to determine the airflow through the vanes of the rotor and a validation study was performed for experimental test performed by Ford Motor Company. The results obtained from the simulation were satisfactory as compared to the experimental results. A comparative study of cooling performance between aluminum brake rotor and cast iron rotor was performed using ANSYS CFX. Aluminum showed better cooling performance than Cast Iron under similar test conditions. Design optimization study was performed to improve cooling performance of the brake rotor using ANSYS Fluent. Introduction of perturbations (known as turbulators in pipe flow) in the vane region was suggested in order to increase turbulence and hence effectively increase the convective heat transfer coefficient of rotor.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Mechanical Engineering (MS)
Level thesis:degree_level
Campus Access Master's Report
Discipline thesis:degree_discipline
Department of Mechanical Engineering-Engineering Mechanics

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Jain, Shubham Ramesh
Committee members dc:contributor.committeemember
  • Paul Sanders
  • Susanta Ghosh
Contributors dc:contributor
  • Gregory Odegard

Subjects

dc:subject × 8

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Michigan Technological University
Base URL
digitalcommons.mtu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Jain, Shubham Ramesh. DESIGN OPTIMIZATION OF BRAKE ROTOR USING CFD TECHNIQUES. Campus Access Master's Report thesis, https://doi.org/10.37099/mtu.dc.etdr/804